Using The Lcd Screen - Canon Optura Pi Instruction Manual

#2_OPTURA Pi_E(07-33)

Using the LCD Screen

Open the LCD screen
Push the LCD panel open button and
open the panel by pulling it away from
the camera. This automatically
switches the LCD screen on and the
viewfinder off. When you close the
LCD panel, the LCD screen
automatically switches off and the
viewfinder switches back on.
Changing the angle of the LCD screen
You can choose the angle of the screen
that suits you best by opening and
rotating the screen, also you can rotate
the LCD screen so that faces in the
direction of the lens (
You can also push the panel flat
against the camera until it is flush with
the side, with the screen facing
outwards.
1/25/00 13:41 Page 23 (1,1)
25).
E
23