Canon Optura Pi Instruction Manual page 82

#4_OPTURA Pi_E(79-99)
RECORDER
The camera's Dubbing Function can remotely control almost all brands and
models of VCR. VCR remote control signals vary depending on model and
brand. First, choose the right RECORDER setting for your VCR. The number
indicates the VCR brand. The letter indicates the set of signals.
Brand
Canon
Aiwa
Akai
Fujitsu
Funai
Hitachi
JVC
Mitsubishi
NEC
Panasonic
Blaupunkt
Quasar
• Once you find the correct setting, remember this and do not change it unless you
change VCRs.
• See p. 85 for details of the "cut-in" and "cut-out" adjustments.
• If you try all the numbers and letters, but the VCR has still not started to record:
– Check the VCR is ready to record, and on pause.
– Check the VCR can receive signals from where the camera is, and that
nothing is blocking the signals.
– Go back and try to set it again.
• If your brand of VCR is not on the chart, or you cannot find the correct setting,
try all the numbers with the selector dial until the VCR starts to record.
• It is unlikely, but you may have a VCR the Dubbing Function cannot control. If
so use the Simple Editing method on p. 87.
1/25/00 13:42 Page 83 (1,1)
Settings Brand
1-A to 1-C Pioneer
2-A to 2-C Sanyo
3-A to 3-C Fisher
4-A Sharp
5-A Sony
6-A to 6-B Toshiba
7-A to 7-C GE
8-A to 8-D RCA
9-A to 9-D Magnavox
10-A to10-G Philips
Seleco
Rex
Settings Brand Settings
11-A Thomson 18-A to 18-C
12-A to12-C Saba
Nordmende
13-A to 13-C Ferguson 19-A to 19-C
14-A to 14-F Grundig 20-A to 20-C
15-A to 15-B Nokia 21-A to 21-C
16-A to 16-B Telefunken 22-A to 22-B
Zenith 23-A
17-A to 17-B Samsung 24-A to 24-B
18-A to 18-C GoldStar 25-A
as of January 2000
E
83