Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec 3510006031
Summary of Contents for Trotec 3510006031
- Page 1 BP21WP OPERATING MANUAL PYROMETER CONTROLLED VIA SMARTPHONE...
-
Page 2: Table Of Contents
Notes regarding the operating manual......... 2 Safety .................. 2 Information about the device.......... 4 BP21WP Transport and storage............ 6 Operation ................ 6 https://hub.trotec.com/?id=43341 Maintenance and repair ............ 15 Safety Errors and faults.............. 15 Read this manual carefully before starting or using the Disposal ................ 16 device. Always store the manual in the immediate vicinity Declaration of conformity ........... 16... - Page 3 Observe and comply with the technical data. The Trotec MultiMeasure Mobile app on the terminal device is used for both operation and the evaluation of the measured Meaning The warning sign is located on the back of the values.
-
Page 4: Information About The Device
Do not store, carry or use the device in the vicinity of Device description data storage media or electronic devices such as hard Used in combination with Trotec's MultiMeasure Mobile app the drives, television units, gas meters or credit cards! pyrometer permits non-contact, infrared surface temperature There is a risk of data loss or damages. - Page 5 Emissivity Technical data The degree of emission is used to describe the energy radiation Parameter Value characteristics of a material. Model BP21WP A material's emissivity depends on various factors: Measuring range -30 °C to 250 °C / -22 °F to 482 °F • Material composition Accuracy ± 3 °C (at > 0 °C) •...
-
Page 6: Transport And Storage
When the device is not being used, observe the following storage conditions: • dry and protected from frost and heat Install the Trotec MultiMeasure Mobile app on the terminal • protected from dust and direct sunlight device you want to use in combination with the device. - Page 7 ü The Trotec MultiMeasure Mobile app is installed. aiming aid for the surface to be measured. ü The Bluetooth function on your terminal device is activated. 1. Start the Trotec MultiMeasure Mobile app on the terminal Carrying out a measurement device.
- Page 8 Individual value measurement Measurement settings When the appSensor has been successfully connected to the Proceed as follows to adjust the settings for the measurement: terminal device, an individual value measurement is started and 1. Press the Menu button (11) or the free area below the the first determined value will be indicated.
- Page 9 Recording measured values Performing an individual spot measurement with image Proceed as follows to record measured values for later If you have selected individual spot measurement with image, evaluation: you will be prompted to choose whether you want to use a 1.
- Page 10 Performing a matrix measurement without background No. Designation Meaning image 23 UNDO button Deletes the saved measured value for In case of a matrix measurement an entire series of measuring the respective grid field. points is captured using a grid the size of which has to be 24 SKIP button Skips the grid field flashing red and selected.
- Page 11 Then start to carry out the measurements. Stopping a recording 1. Always start a matrix measurement in the top left corner Proceed as follows to stop recording the measured values: (1st row, 1st column). 1. Press the REC button (17). ð The grid field to be measured flashes. ð...
- Page 12 Saving a recording Analysing measurements Proceed as follows to save the recorded measured values: Proceed as follows to call up the saved measurements: 1. Press the Save button (29) to save the recorded measured 1. Press the MEASUREMENTS button (32). ð An overview of already saved measurements will be values on the terminal device.
- Page 13 The following functions can be called up in the context menu of Generating a report the selected measurement: The reports generated in the MultiMeasure Mobile app are short reports providing a fast and simple documentation. Proceed as follows to generate a new report: SENSORS MEASUREMENTS REPORTS...
- Page 14 ð The customers overview opens. App settings 2. Press the New customer button (48) to create a new Proceed as follows to make settings in the Trotec MultiMeasure customer. Mobile app: ð An input mask for entering all the relevant information 1.
-
Page 15: Maintenance And Repair
Enable these settings, then try to establish a connection to ð The appSensor is switched off. the sensor again. 2. You may now exit the Trotec MultiMeasure Mobile app on Further information and assistance regarding the used sensor the terminal device. -
Page 16: Disposal
Declaration of conformity Always dispose of packing materials in an environmentally friendly manner and in accordance with the applicable local We – Trotec GmbH – declare in sole responsibility that the disposal regulations. product designated below was developed, constructed and produced in compliance with the requirements of the EU Radio The icon with the crossed-out waste bin on waste Equipment Directive in the version 2014/53/EU. - Page 17 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...