• Avoid looking directly into the laser beam. • Never point the laser beam at people or animals. • Observe the storage and operating conditions as given in the Technical data chapter. pyrometer controlled via smartphone BP21WP...
Page 3
Warning of laser radiation technical data. Observe and comply with the technical data. Laser class 2, P max.: < 1 mW, λ: 650 nm, The Trotec MultiMeasure Mobile app on the terminal device is EN 60825-1:2014 used for both operation and the evaluation of the measured Do not look directly into the laser beam or the opening values.
BC21WP that is also connected to the app, you can to be measured. now adopt the dew point determined with it as alarm threshold for the pyrometer BP21WP so as to obtain In case of individual measurements, the measurement value the functionality of a dew point scanner. An acoustic...
Dimensions 24.3 mm x 37 mm x 150.5 mm (length x width x height) Scope of delivery • 1 x Device BP21WP • 3 x 1.5 V battery AAA • 1 x Wrist strap • 1 x Quick guide pyrometer controlled via smartphone BP21WP...
Page 6
Install the Trotec MultiMeasure Mobile app on the terminal ü The Bluetooth function on your terminal device is activated. device you want to use in combination with the appSensor. 1. Start the Trotec MultiMeasure Mobile app on the terminal Info device.
Page 7
2. You can also press the On / off / measurement button (3) on the appSensor. ð The appSensor determines the current measured value which is then displayed on the terminal device. pyrometer controlled via smartphone BP21WP...
Page 8
10 Refresh measured Performs an individual measurement value button and refreshes the displayed values. 17 REC button Opens the context menu for sensors. 18 Measurement Indicates the measured values of the series indication measurement series in degrees Celsius. pyrometer controlled via smartphone BP21WP...
Page 9
Indicates the measurement grid of the measuring points on the background with grid measuring field (grid field to be image. measured flashes red). 22 Measured value Saves the measured value for the data logging button flashing grid field. pyrometer controlled via smartphone BP21WP...
Page 10
27 Use button Confirms the grid settings and leads 24 SKIP button Skips the grid field flashing red and to the measurement menu. moves on to the next grid field. pyrometer controlled via smartphone BP21WP...
Page 11
Opens the input mask for logging recording data. 30 Discard button Stops the current recording of measured values. Discards the recorded measured values. 31 Continue button Resumes the recording of the measured values without saving. pyrometer controlled via smartphone BP21WP...
Page 12
*.PNG file. 42 Generate image Combines a background image with overlay button the coloured representation of the measured moisture values. 43 Colour scaling Allows you to adjust the colour display button of the measured moisture values. pyrometer controlled via smartphone BP21WP...
Page 13
Sensors MEASUREMEN CUSTOMERS SETTINGS Reports Customers Add a customer from your address book / contacts or enter the details for a new customer. Info You can perform a new measurement directly from the input mask. pyrometer controlled via smartphone BP21WP...
Page 14
Calling up customers App settings Proceed as follows to call up an already created customer: Proceed as follows to make settings in the Trotec MultiMeasure 1. Press the CUSTOMERS button (47). Mobile app: ð The customers overview opens. 1. Press the SETTINGS button (50).
ð The appSensor is switched off. menu item Settings => Help. Selecting the menu item Help 2. You may now exit the Trotec MultiMeasure Mobile app on opens a link to the app's help page. You can open a drop-down the terminal device.
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. pyrometer controlled via smartphone BP21WP...