Canon FS20 Instruction Manual page 104

Dual flash memory camcorder
Hide thumbs Also See for FS20:
Table of Contents

Advertisement

Additional Information
PAPER JAM
- The paper jammed during printing. Select [STOP] to cancel printing. After removing the paper, set some paper
again and retry printing.
PAPER LEVER ERROR
- Paper lever error occurred. Adjust the paper selection lever to the proper position.
PRINT ERROR
- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and
reconnect the USB cable. Check the printer status.
- When you are printing using the
PRINTER COVER OPEN
- Close the printer cover securely.
PRINTER ERROR
- A malfunction has occurred that may require repairs. (Canon PIXMA printers: the printer's green power lamp
and orange error lamp flash alternately.)
- Disconnect the USB cable and turn off the printer. Unplug the printer's power cord from the power outlet and
contact the appropriate customer support center or service center.
PRINTER IN USE
- The printer is in use. Check the printer status.
SET
PRINT ORDER
- No photo has been marked with a print order.
NOTES
About Canon PIXMA/SELPHY DS Printers: If the printer's error indicator flashes or an error
message appears on the printer's operation panel, refer to the printer's instruction manual.
• If you cannot solve the problem even after consulting this list and the printer's instruction
manual, contact the closest Canon Service Center (refer to the list included with the
printer).
104
button, check the print settings.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents