Canon FS20 Instruction Manual page 98

Additional Information
/ /
- The built-in memory is full ([
some space.
/ /
- There is a problem with the built-in memory.
CANNOT COMMUNICATE WITH THE BATTERY PACK CONTINUE USING THIS BATTERY PACK?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
/ /
- The total size of the scenes you selected to copy exceeds the available space on the memory card. Delete
some recordings on the memory card (
CANNOT DIVIDE THE SCENE. INITIALIZE ONLY USING THE CAMCORDER.
- The scene could not be divided because data could not be added to the camcorder's file management data.
Back up the recordings (
CANNOT EDIT
- Cannot move or delete original scenes or scenes in the playlist.
CANNOT EDIT CHECK THE CARD
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder ( 32).
CANNOT ENTER THE STANDBY MODE NOW
- The camcorder cannot enter the standby mode if the remaining battery charge is too low.
CANNOT PLAY BACK
- There is a problem with the memory.
/ /
- There is a problem with the built-in memory.
CANNOT PLAY BACK CHECK THE CARD
- There is a problem with the memory card.
/ /
CAMCORDER
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this
camcorder ( 32).
CANNOT PLAY THE MOVIES ON THIS CARD
- Movies cannot be played back from a memory card with a capacity of 64 MB or less.
CANNOT PLAY THE MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder ( 32).
CANNOT RECORD
- There is a problem with the memory.
/ /
- There is a problem with the built-in memory.
98
BUILT-IN MEMORY FULL
END] appears on the screen). Delete some recordings (
CANNOT ACCESS THE BUILT-IN MEMORY
CANNOT COPY
43, 65) or reduce the number of scenes to copy.
77) and initialize the memory (
CANNOT PLAY BACK CANNOT ACCESS THE BUILT-IN MEMORY
CANNOT PLAY THE MOVIES IN THE BUILT-IN MEMORY INITIALIZE USING ONLY THE
CANNOT RECORD CANNOT ACCESS THE BUILT-IN MEMORY
32).
43, 65) to free