Mattress And Power Unit Installations - Opera FLO Instructions Manual

6. Mattress and Power Unit
Installations
6.1 Remove Existing Mattress
Remove existing mattress from bed frame.
6.2 Secure Mattress Replacement
Place mattress replacement on the bed frame with the foot symbol at foot end.
Secure the mattress at each side using anchor straps. Ensure that the anchor straps
do not interfere with any moving parts of the bed frame before proceeding to the
next step.
6.3 Secure Power Unit
Secure the power unit onto the foot board using hanging hooks.
6.4 Connect Hose Couplers
Firmly connect the air hose couplers to the couplers on the power unit.
6.5 Check CPR Pull Cord
Unzip mattress cover and inspect CPR latch is fully inserted into socket. It should
when re-installing the mattress.
6.6 Power Up Unit
Plug the power unit into an electrical outlet, and turn on the main power rocker
switch on the right side of the power unit.
6.7 Set Patient Weight
Press and turn the lockable patient weight knob on the power unit's control panel to
6.8
patient to lie down on the mattress.
7