Canon PowerShot ELPH 320 HS Getting Started page 74

Adding a Computer
•
If you chose [PIN Method] in step 5, a PIN code will be displayed on the
screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user guide included
with your access point.
• To add multiple computers, repeat the above procedures starting from step 1.
• To complete the registration, touch ^ in the upper right of the image transfer
screen that is displayed after connecting to the target computer in step 8,
and then touch [OK] in the confirmation screen.
w-34
8
Choose a computer to connect
to.
Touch the name of the computer you
● ●
want to connect to.
When using a Macintosh, see "Using
▶ ●
CameraWindow to Transfer Images to a
Computer" (p. w-36).
9
Install drivers (Windows only).
On the computer, click the Start menu
● ●
and choose [Control Panel]. Click
[Network and Internet] and then [View
network computers and devices].
Choose the connected camera from
● ●
[Other Devices] and then double click the
camera icon.
Driver installation will begin.
▶ ●
After driver installation is complete, and
▶ ●
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
Proceed to "Using CameraWindow
▶ ●
to Transfer Images to a Computer"
(p. w-36).