Adding A Camera - Canon PowerShot ELPH 320 HS Getting Started

Adding a Camera

Add a camera to your list of devices to connect to via wireless LAN.
Wireless LAN connection to other cameras is done in ad hoc mode.
• Only Canon-brand cameras equipped with a wireless LAN function can be
connected to wirelessly. Even Canon-brand cameras that support Eye-Fi
cards cannot be connected to if they do not have a wireless LAN function.
You cannot connect to PowerShot SD430 DIGITAL ELPH WIRELESS/
DIGITAL IXUS WIRELESS cameras with this camera.
• To add multiple cameras, repeat the above procedures starting from step 1.
• Once a camera is added, the camera name will be displayed on the screen
in step 3. To connect to a camera again, simply choose the camera name
from the list.
• When a connection destination is set using the Touch Actions setting, you
can automatically access the function to connect to the last connected
destination from the next time by just dragging on the screen without needing
to perform the connection operation.
See the Camera User Guide for details on Touch Action settings.
w-24
1
Access the wireless LAN
screen.
Touch .
● ●
2
Choose a camera.
Touch 4 .
● ●
3
Choose [Add a Device].
Touch [Add a Device].
● ●
Follow steps 1 – 3 on the target camera.
● ●
Camera connection information will be
▶ ●
added when [Start connection on target
camera] is displayed on both camera
screens.
When the target camera has been added
▶ ●
successfully, the image transfer screen
will be displayed (p. w-39).