Adding A Computer - Canon PowerShot ELPH 320 HS Getting Started

Adding a Computer

Add a computer to your list of devices to connect to via wireless LAN.
Infrastructure mode will be used for wireless LAN connection to a computer.
• Be sure to also read the user guide included with your access point.
• Once a computer is added, the computer name will be displayed on the
screen in step 3. To connect to a computer again, simply choose the
computer name from the list.
•
When a connection destination is set using the Touch Actions setting, you
can automatically access the function to connect to the last connected
destination from the next time by just dragging on the screen without needing
to perform the connection operation.
See the Camera User Guide for details on Touch Action settings.
w-32
1
Access the wireless LAN
screen.
Touch .
● ●
2
Choose a computer.
Touch .
● ●
3
Choose [Add a Device].
Touch [Add a Device].
● ●
A list of detected access points will be
▶ ●
displayed in the [Access Point Connect]
screen.
Proceed to either "Connecting to a WPS
▶ ●
Supported Access Point" or "Connecting
to Access Points in the List".
To manually choose and connect to an
▶ ●
access point, see the
explanation column (p. w-35) in
"Connecting to Access Points in the List".
supplemental