Canon PowerShot ELPH 320 HS Getting Started page 67

Checking Your Wireless LAN Settings
If you are already using a wireless LAN, check the following items and mark
each one on the check sheet.
• If system administrator status is needed to adjust network settings, contact
the system administrator for details.
•
These settings are very important for network security. Exercise adequate
caution when changing these settings.
• For instructions on how to check settings, refer to the user guide included
with your access point.
Check sheet
Network name (SSID/ESSID)
The SSID or ESSID for the access point
you use.
Network certificate/data encryption
(encryption method/encryption mode)
The method for encrypting data during
wireless transmission.
Encryption key (network key)
The key used when encrypting data during
wireless transmission.
Key index (sent key)
Network certificate/data encryption is the
set key when using WEP.
• If you use MAC address filtering on your wireless LAN, be sure to enter
the camera's MAC address to your access point. You can check and select
the MAC address for your camera by choosing the 3 tab, [Wireless LAN
Settings], and then [Check MAC Address].
Preparing to Register a Computer
○
None
○
WEP
○
WPA-PSK (TKIP)
○
WPA-PSK (AES)
○
WPA2-PSK (TKIP)
○
WPA2-PSK (AES)
○
1
○
2
○
3
○
4
w-27