Connecting To Web Services - Canon PowerShot ELPH 320 HS Getting Started

Connecting to Web Services

Connect to Web services registered to the camera.
• When a connection destination is set using the Touch Actions setting, you
can automatically access the function to connect to the last connected
destination from the next time by just dragging on the screen without needing
to perform the connection operation.
See the Camera User Guide for details on Touch Action settings.
1
Access the wireless LAN
screen.
Touch .
● ●
2
Choose a Web service.
Touch the icon for the Web service you
● ●
want to send images to.
If you chose e-mail, touch the addresses
● ●
you want to send images to in the [Select
Destination] screen.
3
Connect to an access point.
Touch [Add an Access Point].
● ●
A list of detected access points will be
▶ ●
displayed in the [Access Point Connect]
screen.
For further instructions, see "Connecting
▶ ●
to a WPS Supported Access Point"
(p. w-33) or "Connecting to Access Points
in the List" (p. w-35).
For instructions after connecting to an
▶ ●
access point, see "Sending Images"
(p. w-39).
w-17