Switching Between °C (Centigrade) And °F (Fahrenheit); Automatic Indoor Unit Defrost Function; Auto Heating 8 °C; Control Order - Electrolux EACS/I-HF Series User Manual

Warning!
After turning off, the blinds of the indoor unit
is closed automatically.
2 By pressing the MODE button or selecting the
preset COOL or HEAT modes, the required
operation mode can be selected.
3 With the + or – buttons, desired temperature
can be set.
4 In AUTO mode, the temperature is set
automatically.
5 By pressing the FAN button, the required fan
rotary speed can be selected.
6 Use the button
mode. To enable SLEEP, TIMER, TURBO,
LIGHT functions, press the corresponding
buttons.
Switching between °C (Centigrade)
and °F (Fahrenheit).
Press «—»and MODE buttons at the same
time to switch the temperature measurement
system from °C to °F.
Automatic indoor unit defrost
function.
If the inside and outside temperature is low,
the indoor unit heat exchanger starts to freeze.
At the heat exchanger temperature 0 °C, the
automatic defrosting function is automatically
activated. The compressor and the indoor and
outdoor fans stop. The indicator on the panel of
the indoor unit flashes.
AUTO HEATING 8 °C.
The function is used to automatically main-
tain a home temperature of +8 °C. To enable
or disable it, the appropriate function in the
MENU (Press the TEMP + CLOCK) should be
selected until the indicator appears on the
remote control screen

Control order

1 Upon connecting the air conditioner to the
power supply, press the ON/ OFF button to
turn on the air conditioner.
2 Press the MODE button to select the COOL
or HEAT mode.
3 Use the "+" and "-" buttons to set the value of
the preset temperature in the range from 16 to
30 °С.
to set the louver swing
;
4 In AUTO mode, the temperature is set
automatically and cannot be set from the
remote control.
5 Use the FAN button to set the required
fan rotary mode.
6 Press the MENU button to set the blinds
swing mode. To activate the SLEEP, TIMER,
LIGHT functions, wait for them displayed in
the MENU list.
Replacing the remote control
batteries
In the air conditioner control panel two 1.5V
•
AAA batteries are used.
To remove the batteries, when replacing,
•
slide the control panel cover in the direction
of the arrow (see the figure), remove the
batteries and put new ones. Put the cover.
Do not use the old battery with a new one,
•
or batteries of different types. The battery
service life is no more than 1 year.
If the remote control is expected not be used
•
for a while, remove the batteries.
2
1
The air conditioner control without
a remote control
If you have lost your remote control or it is faulty,
follow these steps:
1. If the air conditioner does not work.
If you want to start the air conditioner, press
the auto power button on the indoor unit (first,
carefully lift the front panel).
When the switch button is pressed, the
air conditioner starts an automatic mode.
Depending on the room temperature, the air
conditioner cools, heats or ventilates. Pressing
the button stops the air conditioner operation.
ENGLISH
3
4
11