System Test - Magneti Marelli 007950006900 Owner's Manual

LOAD ERROR
*The tested battery is bigger than
2000CCA/SAE or 200AH. Or the clamps are
not connected properly. Please fully charge the
battery and retest after excluding both previous
reasons. If reading is the same, the battery
should be replaced immediately.
12.SOC & SOH Display: Press directional keys to see SOC & SOH:
GOOD & PASS
SOC:
13.Test Code:
Press <Enter> to get Test Code.
14.
YES or NO. Press «ENTER» to confirm your
choice.
15.Press «ENTER» return to MAIN MENU or remove the test clamps from the
battery posts after completion of testing batteries to end test.

SYSTEM TEST:

1.
2. Turn off all vehicle accessory loads such as light,
air conditioning, radio, etc. Before starting the
engine.
3. When the engine is started, one of the three results will be displayed along
with the actual reading measured.
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu
xx.xx V
90%
LOAD ERROR
GOOD & PASS
SOH:
xxxxxxxxxxxx
PRINT RESULT?
SYSTEM TEST
TURN OFF LOADS
START ENGINE
13
xxxx CCA/SAE
90%
CODE
YES/NO
xx.xx V