Specifications - Makita DTP131 Instruction Manual

ENGLISH
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Indicator lamps
6. Check button
7. Switch trigger
8. Lamp
9. LED display

SPECIFICATIONS

Fastening Capacities
Impact driver mode
Hammer drill mode
Drill mode
Fastening Capacities
Screwdriver mode
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Explanation of general view
10. Lamp button
11. Reversing switch lever
12. Speed change lever
13. Mode mark
14. Action mode changing ring
15. Arrow
16. Changed in three steps
17. Hard
18. Medium
Model
-1
No load speed (min ) (Soft / Medium / Hard)
Impacts per minute (Soft / Medium / Hard)
No load speed (min
(Low (1) / High (2))
Blows per minute (min
(Low (1) / High (2))
Drilling Capacities / Concrete
Drilling Capacities
(Low (1) / High (2))
(Low (1) / High (2))
Net weight
Rated voltage
D.C.14.4 V Model
D.C.18 V Model
Machine screw
Standard bolt
High tensile bolt
-1
)
-1
)
Steel
Wood
-1
No load speed (min )
Machine screw
Self drilling screw
-1
No load speed (min )
19. Soft
20. Control button
21. Battery capacity
22. Bit
23. Sleeve
24. Bit-piece
25. Groove
26. Hook
27. Screw
DTP131
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
0 - 1,400 / 0 - 2,200 /
0 - 2,800
0 - 1,200 / 0 - 2,400 / 0 - 3,200
0 - 700 / 0 - 2,800
0 - 8,400 / 0 - 32,400
8 mm
10 mm / 6.5 mm
21 mm / 12 mm
0 - 700 / 0 - 2,800
3.5 mm - 6 mm / 4 mm - 6 mm
4 mm, 5 mm / 4 mm (Thickness 3.2 mm max.)
0 - 300 / 0 - 1,100 (depends on torque setting)
0 - 600 / 0 - 2,300 (P mode)
1.5 - 1.7 kg
D.C.14.4 V
BL1415N / BL1430 / BL1430B / BL1440 /
BL1450 / BL1460B
BL1815N / BL1820 / BL1820B / BL1830 /
BL1830B / BL1840 / BL1840B / BL1850 /
BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD /
DC18SE / DC18SF
DTP141
0 - 1,300 / 0 - 2,200 /
0 - 2,700
0 - 700 / 0 - 2,700
0 - 700 / 0 - 2,700
1.5 - 1.9 kg
D.C.18 V
5