Installing And Removing The Battery; Installing The Battery; Checking The Battery Level - Canon EOS-1Ds Instruction Manual

Installing and Removing the Battery

Installing the Battery

If the battery's rubber lining (for water resistance) is not clean,
use a moist cotton swab to wipe it clean.

Checking the Battery Level

After replacing the battery or before using the camera, check the battery level.
Detach the battery compartment cap.
1
•
Grasp both sides of the cap and pull it off.
•
The battery's protective cover can be attached to
the battery compartment cap. Keep the cap and
cover in a safe place.
Insert the battery.
2
•
Insert the battery and while pushing it in, turn the
release handle as shown by the arrow.
Turn the <
s
When the <
check is executed automatically and the battery
level is displayed on the top LCD panel.
: Battery level OK.
: Battery running low.
: Battery will be exhausted soon.
: Recharge the battery.
Rubber lining
> switch to < >.
> switch is turned on, the battery
1
23