White Balance Auto Bracketing - Canon EOS-1Ds Instruction Manual

White Balance Auto Bracketing

You can bracket the white balance of three consecutive shots automatically within +/–3 stops
in full-stop increments. For each shot, the camera changes the color temperature automatically
vis-à-vis the current white balance setting. One stop is equivalent to 5 mired as provided by a
color conversion filter. The three-shot bracketing sequence will be as follows: standard color
temperature, bluish (minus), and reddish (plus). The current drive mode (→p.99) is used during
the bracketing sequence.
Standard amount
+/–1 stop
+/–2 stops
Bracketing amount
+/–3 stops
46
Press the <
1
simultaneously.
s
The rear LCD panel will display the <
Set the bracketing amount.
2
•
Let go of the <
turn the < > dial.
s
The rear LCD panel will display the bracketing
amount, and the icon for the current white balance
setting will blink.
•
After selecting the desired bracketing amount, let
go of the <
s
While white balance bracketing is active, the icon
for the current white balance setting will blink on the
rear LCD panel.
> and < > buttons
> button or < > button, then
> button and < > button.
>.