Erasing An Image; Erasing A Single Image - Canon EOS-1Ds Instruction Manual

Sound Recording for an Image / Erasing an Image
•
A sound recording is not possible on a protected image.
•
The EOS-1Ds camera itself cannot play back the sound recording. The EOS-1Ds
camera itself cannot play back the sound recording. You must transfer the image
to a personal computer and use the dedicated software to play the sound
recording.
•
The <
If you press the <
function instead of the sound recording. To make a sound recording, keep
pressing the <
when you finish the sound recording.
•
You cannot erase only the sound recording with the camera alone.

Erasing an Image

You can use the < > button to erase a single image or all images in a folder. You can also
use menu commands to erase all images in a CF card.
•
Once an image is erased, it cannot be recovered. Make sure you are erasing the right
image.
•
You can protect important images from erasing. (→p.119)

Erasing a Single Image

122
> button has dual functions for image protection and sound recording.
> button and release it immediately, image protection will
> button until the "Recording" message appears and let go
Playback the image.
1
•
Press the <
s
The last (newest) image will be displayed.
Select the image to be erased.
2
•
While pressing the <
dial to select the image to be erased.
Display the erase menu.
3
•
Press the < > button.
s The erase menu will appear at the bottom of the
LCD monitor. To exit the erase menu, press the
< > button again.
•
You can also follow steps
image immediately after it is taken.
> button to playback the image.
> button, turn the <
3 4
and to erase an
>