Cedima CF-1020 B Translation Of The Original Operating Manual
  1. Manuals
  2. Brands
  3. Cedima Manuals
  4. Cutter
  5. CF-1020 B
  6. Translation of the original operating manual

Cedima CF-1020 B Translation Of The Original Operating Manual

Joint cutter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Translation of the original operating manual
CF • 1020 B
Joint Cutter
Change index 005 • Issue date: 21/09/2021 • English

Advertisement

Table of Contents
loading

Related Manuals for Cedima CF-1020 B

Summary of Contents for Cedima CF-1020 B

  • Page 1 Translation of the original operating manual CF • 1020 B Joint Cutter Change index 005 • Issue date: 21/09/2021 • English...
  • Page 2 Subject to change without prior notice. Suggestions and to this documentation or to the machine should be sent to the address named above. notes Last amended 21/09/2021 Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 3: Table Of Contents

    Resetting the Emergency-Stop Function ..............23 3.5 Signs on the Machine ..........................23 3.5.1 Warning Signs ........................24 3.5.2 Additional Labels ......................... 25 3.6 Residual Danger ............................26 Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 4 7.3 Carrying out the Cutting Process ......................70 7.4 Eliminating Disruptions in Operation ....................74 7.5 Switching off Machine ..........................75 7.6 Daily Shut-Down ............................75 Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 5 8.9 Shut-Down ..............................94 8.9.1 Shutting Down for Several Days ..................94 8.9.2 Long-term Shut-Down ....................... 94 8.9.3 Storage When not in Use ....................95 8.9.4 Disposal ........................... 95 Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 6 Contents Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 7: Product Information

    EC Declaration of Conformity (page 11) 1.1 Characteristic data Characteristic data of the machine Machine model Joint Cutter CF • 1020 B Year of manufacture From 2014 Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 8: Manufacturer's Id Label

    Machine height 1,050 mm Machine weight (without water and dia- approx. 121 kg mond saw blade) Machine weight approx. 154 kg (with water and diamond saw blade) Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 9 Water tank (removable) 28 l Pressurised water connection (external) GEKA connection (1 bar to 6 bar) Operating materials Engine oil SAE 10W-30 Fuel Normal, lead-free petrol Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 10: Scope Of Delivery

    "CEDIMA Diamantwerkzeug- und Maschinenbaugesellschaft mbH. 1.4.4 Other Relevant Documents The operating manual of the drive engine is included with the machine. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 11: Ec Declaration Of Conformity

    This declaration becomes void as soon as major modifications are made to the machine. A new conformity procedure in accordance with the EU machinery directive is then required. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 12: Information For The Reader

    The illustrations in this original operating manual show the machine in a simplified form in some cases. 2.3 Abbreviations Used The following abbreviations are used in the operating manual: Abbreviations Petrol ® CEDIMA Joint Cutter Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 13: Highlighted Passages

    Failure to observe the warning can result in considerable damage to the machine or the surrounding area. An arrow indicates a precautionary measure which must be taken to avert the hazard.  Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 14: Safety

    The petrol engine heats up during operation. • All protective covers must be fitted correctly. • Changes to the sequence of movements or malfunctions must be reported immediately. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 15: Impermissible Operating Conditions

    • The danger areas must always be clear. Persons may only enter the danger areas with the machine de-energised. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 16: Notes On Using Accessories And Aids

    Operating the machine free of faults (page 18) 3.2.1 Planning and Checking Safety Measures The obligation to exercise diligence requires the operator to plan safety measures and to check their implementation. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 17: Minimising Risk Of Injury

    Do not operate the machine in closed rooms. Exhaust gases contain carbon mon- oxide. • Observe the conditions for the flushing water supply specified by the manufacturer. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 18: Operating Machine Fault-Free

    They must have been trained as a specialist to work independently on the machine. • They must have received sufficient instruction to work on the machine under the supervision of a trained specialist. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 19: User Groups

    Instruction; the work may only be carried out under the direction and supervision of an industrial mechanic/agricultural machine mechanic in accordance with the recognised principles of technology. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 20: Safety Equipment

    The machine is equipped with safety equipment at dangerous areas. Familiarise yourself with all safety equipment. This makes it possible to prevent or minimise injuries and machine failures in critical cases. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 21: Fixed Safety Equipment

    3.4.3 Moving Safety Equipment The machine is not equipped with any moveable safety equipment. 3.4.4 Signalling Devices The machine is not equipped with any signalling devices. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 22: Triggering The Emergency-Stop Function

     when pressed. ‹EMERGENCY -STOP BUTTON› locks in place  to the ‹SUPPLY OF POWER› ‹MOTOR› stopped  ‹MACHINE› stops  Emergency-Stop function has been triggered. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 23: Resetting The Emergency-Stop Function

    Warning signs and other information on the system must always be clearly legible. Illegible safety symbols and other information must be replaced immediately: • Warning signs (page 24) • Additional labels (page 25) Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 24: Warning Signs

    Required: Wear hearing protection Required: Wear safety goggles Required: Wear protective gloves Required: Wear safety shoes Required: Wear dust protection mask Required: Read the operating manual prior to operation Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 25: Additional Labels

    Additional labels are affixed to the machine in accordance with their function. Overview of adhesive labels Adhesive Label Meaning Measured output sound pressure level Maximum size of the diamond saw blade Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 26: Residual Danger

    If the splash water Wear safety goggles. guard is damaged, there is a danger of injury due to unimpeded splashing of flushing water and abrasive material. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 27 Always work in a safety-oriented times. There is a danger manner. of tripping over it. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 28 Proceed with extreme caution when re- danger of explosion and fuelling. fire. Immediately remove spilled fuel. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 29: Machine Overview

    Height-adjustable handle (page 40) • Cutting depth adjustment (page 41) • Cutting shaft swivelling unit (page 42) • Flushing water connection (page 44) • Visor device (page 46) Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 30: Overview

    See section "Blade Guard" (page 37). Cutting shaft swivelling unit See section "Cutting shaft swivelling unit" (page 42). Cutting shaft protective See section "Cutting shaft protective cover"(page 36) cover Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 31: Removable Water Tank

    The holding plate can be swivelled to the side so that the fuel tank can be accessed. The hold- ing plate is locked against accidental swivelling with a locking strap. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 32 Used to filter the air for the engine. The air filter must be checked for soiling and cleaned at regular intervals; see chapter "Setup" > "Readying the machine for operation“ (page 51). Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 33 Engine – front side Legend Designation Function Engine - Main switch See section "Engine - Operating elements" (page 34). Oil dipstick Used for checking the engine oil level. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 34 Selector lever Regulates the air intake. The air flap is in the operating position. Regulates the air intake. The air flap is in the start-up po- sition. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 35 Engine - Main switch Selector switch O OFF Switches the machine off. Interrupts the ignition connection. I ON Creates or restores the ignition connection. The machine can be started via the recoil starter. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 36: Cutting Shaft Protective Cover

    Fasten the protective cover of the cutting shaft on ting shaft the cutting shaft's swivelling unit. Cutting shaft protective Protects the operator from reaching into the cover rotating cutting shaft. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 37: Blade Guard

    Must be removed to change the diamond saw blade. Fastening screws - hand Fastens the hand guard on the blade guard. guard Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 38 The blade guard can be fitted onto guard both sides of the swivelling unit of the cutting shaft. Cutting shaft swivelling unit See section "Cutting shaft swivelling unit" (page 42). Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 39: Parking Brake

    This also raises and lowers the braking mech- anism. Braking mechanism Locks the machine against rolling away. The braking mechanism presses on the rear left wheel of the ma- chine Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 40: Height-Adjustable Handle

    Used to fasten the adjusted height of the handle. Tool holder The included Bowden cable is located here: Allen key (10 mm) • • Open-ended spanner (17 mm) Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 41: Cutting Depth Adjustment

    Indicates the currently set cutting depth of the fit- ted diamond saw blade. The cutting depth scale is set to zero here; see the chapter "Operation" > "Carrying out cutting" (page 70). Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 42: Cutting Shaft Swivelling Unit

    "Set-up" > "Converting the ma- chine" (page 60). A mounting flange is located on each mounting device. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 43 • Tighten fastening screw Driver pin Adjusts the diamond saw blade when installing the mounting flange. Prevents accidental slipping of the diamond saw blade during operation. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 44: Flushing Water Connection

    ‹REMOVABLE WATER TANK› of pressurized water. Depending on which type of supply is used, the flushing water connection hose (female) must be connected to the respective coupling (male). Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 45 GEKA connection. Water valve – pressurized Opens and closes the water supply to the blade water guard. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 46: Visor Device

    The visor is fastened to the swivelling device with lock nuts. Swivelling device The visor is folded up and down using the swivelling device. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 47: Working And Danger Areas

    4.5 Operating Modes The machine is only to be operated in manual mode. An operator is required to monitor and intervene in the cutting process. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 48: Transportation And Setup

    Lifting gear must be designed and approved for the weight of the machine. • Only use lifting gear in proper condition. • Transport the machine carefully. Do not lift, slide or support sensitive parts (for example levers). Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 49: Unpacking

    If possible, only lift the machine to a height that still enables the machine to be  "guided" with the hands! Always wear safety shoes!  Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 50 ‹MACHINE› ‹LOAD LIFTING GEAR› Unhook the or the from the ‹LOAD LIFTING GEAR› ‹SUSPENSION SYSTEM› ‹LIFTING EYE›  That's it! Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 51: Setup

    Check the fill level of the ‹FUEL TANK› There is insufficient petrol in the fuel tank.  Refill petrol; see chapter "Maintenance repairs and shut-down" "Refilling petrol" (page 79). Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 52 Close the ‹REFILLING OPENING - FUEL› Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 53 Tension the V-belts; see chapter "Maintenance repair and shut-down">  "Tensioning V-belts" (page 82). Press the back on the ‹PROTECTIVE CAP› ‹V-BELT INSPECTION OPENING› The tension of the V-belts has been checked. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 55: Moving The Cutting Shaft

    6.2 Moving the cutting shaft Carry out the following steps: ‹ ›. Loosen the CUTTING DEPTH ADJUSTMENT LOCK  The cutting depth adjustment lock is open. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 56: Fitting And Removing The Diamond Saw Blade

    Do not operate soldered diamond saw blades at excessively high circumferential speeds. The diamond segments can separate from the diamond saw blade. See the information from the diamond saw blade manufacturer on this topic. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 57 "Moving the cutting shaft" (page 53). BLADE mounted The cutting shaft has been moved to the height of the diamond saw blade to be fitted. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 58 ‹DIAMOND SAW BLADE› Ensure that you run the through the holes of the ‹DRIVER PIN› ‹DIAMOND SAW BLADE› Position the on the ‹PRESSURE FLANGE› ‹CUTTING SHAFT› Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 59: Removing The Diamond Saw Blade

    The following sections contain information on fitting and removing the blade guard: • Removing the blade guard (page 58) • Fitting the blade guard (page 59) Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 60: Removing The Blade Guard

    Carry out the following steps: Using a (SW 17) loosen both the of the ‹SPANNER› ‹FASTENING SCREWS ‹BLADE GUARD› Carefully lift the off the machine. ‹BLADE GUARD› Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 61: Fitting The Blade Guard

    The sequence for fitting the is the reverse of that followed in its  ‹BLADE GUARD› removal; see section "Removing the blade guard" (page 58).  That's it! Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 62: Converting The Machine

    ‹VISOR DEVICE› Swivel the ‹VISOR DEVICE› Using a (SW 17), re-tighten the on the opposite side. ‹SPANNER› ‹FASTENING SCREW› The visor device has been swung over. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 63: Commissioning

    Is the machine ready for operation? - See section "Getting the machine ready for operation" (page 51). • Is an approved diamond saw blade installed in the machine? See section "Fitting and removing the diamond saw blade" (page 54). Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 64: Commissioning The Machine

    Screw the knob into the cutting depth adjustment crank handle.  Tighten the knob with an open-ended spanner (13 mm). The knob has been screwed in. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 65 Using an Allen key (10 mm) fit the fastening screw of the height-adjustable handle onto the machine frame again. The desired working height can be adjusted before tightening the fastening screws. The height-adjustable handle has been turned Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 66 Conduct a functionality check of the on the machine; see ‹EMERGENCY-STOP SWITCH› chapter "Safety" > "Emergency-stop switch" (page 22). The checks have been carried out.  That's it! Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 67: Operation

    Is there anyone in the danger areas of the machine? • No one can be injured when the machine starts up? • The operator knows how to react in case of malfunctions? Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 68: Preparing The Machine For Operation

    With water tank operation ‹FLUSHING WATER REFILL OPENING› ter in the ‹REMOVABLE WATERTANK› The machine is now supplied with flushing water.  That's it! Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 69: Switching On Machine

    Always wear hearing protection, protective gloves, safety shoes, protective goggles  and a dust protection mask during operation. Carry out the following steps: Turn the to Position ‹ENGINE MAIN SWITCH› I ON Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 70 Move the to Position ‹FUEL COCK› The fuel supply is open.  Move the to Position ‹CHOKE LEVER›  The air flap is opened for cold start. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 71 Set the gas lever to maximum.  Check the fill level of the fuel tank.  Check the spark plug of the engine for proper functioning.  Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 72: Carrying Out The Cutting Process

    ‹DIAMOND SAW BLADE› ‹HAND CRANK CUTTING DEPTH ADJUST- above the intended underground cut; see the chapter "Setup" > MENT› 2 cm "Moving the cutting shaft" (page 53). Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 73 ‹CUTTING DEPTH LOCKING SCREW› ‹ALLEN KEY›  Now the cutting depth scale cannot be moved. The zero point has been set. The cutting depth zero point has been specified. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 74 ‹CUTTING DEPTH ADJUSTMENT HAND back to the highest position; see the chapter "Setup" > "Moving the cutting CRANK› shaft" (page 53). The machine has been aligned to the cut. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 75  WATER VALVE ON THE REMOVABLE WATER TANK› Regulate the flow rate of the flushing water using the respective ‹WATER VALVE› Flushing water has been connected. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 76: Eliminating Disruptions In Operation

    You will find the troubleshooting table in the chapter "Maintenance, repair and shut-down" > "Troubleshooting" (page 87). Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 77: Switching Off Machine

    The machine is switched on; see the section "Switching on machine" (page 67). Prerequisite: Shutting off the Carry out the following steps: flushing water Close the respective  ‹WATER VALVE› The flushing water is shut off. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 78 Carry out cleaning work on the machine; see the chapter "Maintenance, repair and shut-  down" > "Cleaning work" (page 93). The machine has been cleaned.  That's it! Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 79: Maintenance, Repairs And Shut-Down

    Indicate that maintenance or repair work is being carried out with warning signs. Safety-conscious, foresighted behaviour of the personnel prevents dangerous situations during maintenance and repair work. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 80: Refilling Operating Materials

    8.2 Refilling operating materials Information on refilling the machine's operating materials is provided here: • Refilling petrol (page 79) • Refilling engine oil (page 81) Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 81: Refilling Petrol

    Catch the escaping operating materials with suitable containers.  Prevent operating materials from getting into the soil.  Carry out the following steps: Loosen the for the ‹SAFETY FLANGE› ‹RETAINING PLATE› Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 82 Refilling operating materials Maintenance, Repairs and Shut-Down Move the to the side. ‹SWIVELLING RETAINING PLATE› Open the ‹REFILLING-OPENING – FUEL.› Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 83: Refilling Engine Oil

    ‹ENGINE OIL› ‹FUNNEL AND HOSE› Close the ‹ENGINE OIL REFILL OPENING› Wipe off any spilled oil with a ‹CLOTH RAG› Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 84: V-Belts

    Allen key (10 mm) Carry out the following steps: Using the (SW 10) loosen the of the V-belt tensioner. ‹ALLEN KEY› ‹TENSIONING SCREW›  The V-belts have been relaxed. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 85 The V-belts cannot be pressed in one centimetre? The V-belt tension is incorrectly adjusted. Repeat steps 1 to 5  Press the back on the ‹PROTECTIVE CAP› ‹V-BELT INSPECTION OPENING›  That's it! Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 86 Carry out the following steps: covers Using (SW 17), unscrew the two on the cutting shaft ‹TWO SPANNERS› ‹FASTENING SCREWS› protective cover Remove the ‹CUTTING SHAFT PROTECTIVE COVER› Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 87 V-belt tensioner. ‹ALLEN KEY› ‹TENSIONING SCREW›  The V-belts have been relaxed. Using a (SW 17) unscrew the two of the ‹SPANNER› ‹FASTENING SCREWS› ‹V-BELT PROTECTIVE COVER›. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 88: Replacing V-Belts

    ‹CUTTING SHAFT PROTECTIVE COVER› Using the (SW 17) tighten both the of the ‹TWO SPANNERS› ‹FASTENING SCREWS› ‹CUT- again. TING SHAFT PROTECTIVE COVER› The protective covers have been installed. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 89: Troubleshooting

    Engine has no power. Fuel system soiled or Clean fuel system, have repaired. defective. Air filter soiled. Replace air filter. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 90: Problems With The Cutting Process

    Check the correct seating of the protective cover • of the cutting shaft on the blade guard holder. Check the water pump impeller and replace the • impeller if necessary. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 91 Poor setting of diamond Send diamond saw blade to manufacturer. saw blade Diamond saw blade is too Reduce feed. heavily loaded Diamond segments are Sharpen diamond saw blade. blunt Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 92 Pressure flange not cor- Re-tighten screws of pressure flange. drive shaft and stops under rectly tightened load V-belts slip or are torn Tension V-belts or replace. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 93: Maintenance Schedule

    Check fluid levels, top up Maintenance work according to engine operating manual Perform maintenance more frequently in dusty environment Depending on load, condition, display Depending on extent of damage Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 94 After 3 Months or 50 h Weekly After 1 month or 20 h. For the first time after 10 operating hours After end of work Before each start-up Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 95: Lubricating Points

    Operation" > "Daily Shut-Down" (page 75). Carry out the following steps: Clean the entire machine with a with normal pressure (3 bar).  ‹WATER HOSE›  That's it! Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 96: Spare Parts List

    Carry out the shut-down for several days; see the chapter "Shutting down for several days" (page 94). Empty the ‹FUEL TANK› Grease exposed with a ‹METAL SURFACES› ‹FILM OF OIL›  That's it! Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...

  • Page 97: Storage When Not In Use

    Dispose of cleaned cables as electrical scrap. • Observe the locally applicable disposal regulations during disposal. • Dispose of all parts in accordance with the locally applicable legal regulations. Cedima • Technical Documentation • Joint Cutter CF •1020 B • Issue date: 21/09/2021...
  • Page 98 ® CEDIMA Diamantwerkzeug- und Maschinenbaugesellschaft mbH Lärchenweg 3 • D-29227 Celle, Germany Tel. +49 (0)51 41 88 54 -1 00 • Fax +49 (0)51 41 88 54-1 11 info@cedima.com • www.cedima.com...

Table of Contents