Benchmark 209CC Owner's Manual page 18

209CC PRESSURE WASHER, 3200 PSI
OWNER'S MANUAL
7. CONNECT SPRAY WAND AND QUICK-CONNECT NOZZLES
1) Attach the spray wand into spray gun. Tighten by hand.
2) Turn OFF the water and release trigger. Point the spray gun in a safe direction and
make sure trigger is locked and can't be squeezed.
3) Choose the quick-connect nozzle you want to use, pull back on collar of spray wand,
insert the nozzle and release collar. Tug on the nozzle to make sure it is securely in
place. More information please see "How to Use Quick-Connect Nozzles" section.
15° 40° Soap Turbo
CHECK LIST BEFORE STARTING ENGINE
Review the assembly to ensure you have performed all of the following:
• Be sure to read "Safety Rules" and "Operation" sections before using the pressure
washer.
• Make sure handle is in place and secure.
• Check that oil has been added to proper level in engine crankcase.
• Add proper gasoline to fuel tank.
• Check for properly tightened hose connections (high pressure and water supply) and for
tight connections and that there are no kinks, cuts, or damage to the high pressure hose.
• Provide proper water supply (not to exceed 100°F or 38°C).
• If starting pressure washer after storage, see "Storage" section below.
17