Advertisement
1 - HOME
This screen shows all your settings, and appears
red to begin with as nothing has been set. As you
define settings, the corresponding boxes will
turn green to show that they are ready to go.
Press MENU to begin.
2 - MENU
This is where you control the settings. Use the
three 'set' buttons to control the respective
settings for the run.
3 - SET TEMPERATURES
Here you can set the mixing temperature and the
extruding temperature. Use the slider and/or the
+ and - buttons to control the settings.
(please find
more guidance on temperature
settings on p. 7)
Pressing SET will take you to the WARM UP
screen
4 - WARM-UP
This screen has a timer to allow the machine to
warm to the correct temperature. You will not
be able to escape this screen until the warm-up
is complete, at which time, you will return to the
HOME screen.
USER INTERFACE
5
Advertisement
