Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Noztek Manuals
  4. 3D Printers
  5. Xcalibur
  6. User manual

Noztek Xcalibur User Manual

Hide thumbs Also See for Xcalibur:

Advertisement

Quick Links

Download this manual
© Noztek.com 2018. All rights reserved.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Xcalibur and is the answer not in the manual?

Questions and answers

Related Manuals for Noztek Xcalibur

Summary of Contents for Noztek Xcalibur

  • Page 1 © Noztek.com 2018. All rights reserved.

  • Page 2: Table Of Contents

    © Noztek.com 2018. All rights reserved. Warranty / Safety Diagram Main Features Power Switch & Start-up Guide User Interface Connecting Xcalibur to your computer Changing the nozzle/Colour mixing/Maintenance/Lubrica- tion/Barrel Jam WARRANTY...
  • Page 3 © Noztek.com 2018. All rights reserved. • Equipment manufactured by Noztek carries the standard machine tool guarantee of freedom from defects in workmanship and material for one year from date of ship- ment. • TO INSURE THAT YOUR WARRANTY IS HELD IN EFFECT, PROPER OPERATION PROCE- DURES MUST BE OBSERVED.

  • Page 4: Warranty / Safety

    © Noztek.com 2018. All rights reserved.

  • Page 5: Diagram

    © Noztek.com 2018. All rights reserved.

  • Page 6: Main Features

    The Xcalibur uses PID for greater temperature and speed control. Computer connection The Xcalibur Controller enables you to take control of the machine via USB connection. Warm-Up Designed to allow the barrel to fully heat after 10 min- utes so unmelted materials do not block the motor.

  • Page 7: Power Switch & Start-Up Guide

    45 degree bracket (if using). There are six bolts, two for either end and two which connect the bracket together. Once powered up, the Xcalibur will take a short period to boot before presenting the control screen/User Interface.

  • Page 8: User Interface

    (third row) and access to the Menu screen (bottom). To activate the heating bands, touch any of the temperature activation/status switch es. Upon activating the heating bands, the Xcalibur display will switch to the “warm up” screen ( ). The Xcalibur will not exit this screen until the heating bands are at fig.4...
  • Page 9 Menu Screen The menu screen ( fig. 5) gives the user access to all of the Xcalibur's settings and addi- tional functionality. SET TEMP: sets the desired temperature of the individual heating bands. SET SPEED: sets the desired revolutions per minute (rpm) for the D.C. motor drive.
  • Page 10 © Noztek.com 2018. All rights reserved. Setting Temperature This screen enables the user to set the temperature for each heat band. To do this the user can either use the sliders or the “+” and “-” buttons and then press the “SET”...
  • Page 11 This will not power off the Xcalibur entirely, but will stop the heating and the motor. Do this us ing the “+” and “-” buttons and then press the “SET” button. To cancel your modifica...

  • Page 12: Connecting Xcalibur To Your Computer

    © Noztek.com 2018. All rights reserved. CONNECTING XCALIBUR TO A COMPUTER The Xcalibur Controller software enables you to control the Xcalibur and collect data using a USB connection. The data can then be saved to a “.csv” file in order to be opened in a spreadsheet software.
  • Page 13 © Noztek.com 2018. All rights reserved. Before attempting this operation please use insulated gloves. To switch between noz- zle sizes to heat up the unit to175c. Unscrew the nozzle, clean off any excess plastic from the internal threads, then screw on new nozzle.
  • Page 14 Please see our FAQ help section on our website at www.noztek.com for further trou- bleshooting. If the answer to your quey is not found here, please contact the Noztek expert team directly. Noztek Ltd Unit C3 Dolphin Industrial Estate Evershed Way, Shoreham by Sea...