Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Noztek Manuals
  4. 3D Printers
  5. touch
  6. User manual

Noztek touch User Manual

Hide thumbs Also See for touch:

Advertisement

Quick Links

© Noztek.com 2018. All rights reserved.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the touch and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Noztek touch

Summary of Contents for Noztek touch

  • Page 1 © Noztek.com 2018. All rights reserved.

  • Page 2: Table Of Contents

    © Noztek.com 2018. All rights reserved. Warranty / Safety Diagram / Main Features Quick-start Guide / Power Switch / Bracket Operation Guide Changing the nozzle/Colour mixing/Maintenance/Lubrication/Barrel Contact Noztek...
  • Page 3 © Noztek.com 2018. All rights reserved. WARRANTY • Equipment manufactured by Noztek carries the standard machine tool guarantee of freedom from defects in workmanship and material for one year from date of shipment. • TO INSURE THAT YOUR WARRANTY IS HELD IN EFFECT, PROPER OPERATION PROCE- DURES MUST BE OBSERVED.

  • Page 4: Diagram / Main Features

    Last targets memory: the last target temperature and speed will be remembered after a restart. Last timer settings will also be kept. PID: The Noztek Touch is using PID for temperature and speed control. Warm-Up: It's designed to allow the barrel to fully heat after 10 minutes so un-melted materials do not block the motor and avoid damaging it or the machine.

  • Page 5: Quick-Start Guide / Power Switch / Bracket

    Turn on machine using illuminating on/off button. Once powered up, the Touch will take a short period to boot into the main screen. From here, you can control the motor and the two heater bands. TEMP 1 represents the main heater band. TEMP 2 rep- resents the pre-heater band.

  • Page 6: Operation Guide

    © Noztek.com 2018. All rights reserved. OPERATION GUIDE · Remove the unit from the packaging · If you are using the 45 degree bracket, secure the extruder to a bench using the mounting holes. · Plug the extruder into mains power.
  • Page 7 (top row), their set temperature and speed (second row), activation/status switches (third row), and access to the Menu screen (bottom). To activate the heating bands, touch any of the temperature activation/status switches. Upon activat- ing the heating bands, the Xcalibur display will switch to the “warm up” screen (fig.3). The Xcalibur will not exit this screen until the heating bands are at set temperature, or the user aborts the heating process.
  • Page 8 © Noztek.com 2018. All rights reserved. Menu Screen The menu screen (fig.4) gives the user access to all of the Xcalibur's settings and additional function- ality. Fig.4: The menu screen options. SET TEMP: sets the desired temperature of the individual heating bands.
  • Page 9 © Noztek.com 2018. All rights reserved. enables the user to set the temperature for each heat band. To do this the user can ei- This screen ther use the sliders or the “+” and “-” buttons and then press the “SET” button. If you want to...
  • Page 10 This screen off the Touch but will stop the heating and the motor. To do this the user has to use the “+” and “-” buttons and then press the “SET” button. If you want to cancel your modifications press...

  • Page 11: Changing The Nozzle/Colour Mixing/Maintenance/Lubrication/Barrel

    © Noztek.com 2018. All rights reserved. CHANGING THE NOZZLE Before attempting this operation please use insulated gloves. To switch between nozzle sizes to heat up the unit to175c. Unscrew the nozzle, clean off any excess plastic from the internal threads, then screw on new nozzle.

  • Page 12: Contact Noztek

    Please see our FAQ help section on our website at www.noztek.com for further trou- bleshooting. If the answer to your quey is not found here, please contact the Noztek expert team directly. Noztek Ltd Unit C3 Dolphin Industrial Estate Evershed Way, Shoreham by Sea...