Table of Contents
Advertisement
Remote Control
USER
Shows configuration of the camera user buttons
and allows you to trigger them. Press the number
icons to trigger the user buttons.
Frequent reloading of the Web Remote camera interface connected with WiFi indicates a limited
WiFi range. Please place the device closer to the camera or connect via Ethernet. You may also
consider to use the WiFi client mode which allows connecting the camera to a WiFi network.
After a camera update, the Web Remote feature may not be fully functional until the browser cache
of your web browser has been cleared. Always use a 'private' or 'incognito' browser window when
using the Web Remote to operate the camera and to perform a SUP update. This prevents possible
erroneous behavior.
23.2
Camera Access Protocol (CAP)
The Camera Access Protocol (CAP) is an IP based API used to control and monitor ARRI cameras
via a network connection. The protocol incorporates functions to perform color grading, query and set
values like exposure index or sensor frame rate, start and stop recording and many more. Information
on the Camera Access Protocol is available through the ARRI Partner Program free of charge. For
more details please see our
White Papers
Activation of CAP Server
► Select MENU > System > Camera Access Protocol (CAP)
to switch remote access to the camera via the Camera Access Protocol on or off.
CAP Server Password
► Select MENU > System > Camera Access Protocol (CAP) > Cap Server Password.
► Use the on-screen keyboard to enter a password used for Camera Access Protocol connections.
CAP Client List
The CAP client list shows the name of the currently connected client. The list shows 'NONE' if no client
is connected, and 'NO NAME' if the connected client has not transmitted its name.
► Select MENU > System > Camera Access Protocol (CAP) > CAP Client List to display the list.
23.3
Camera Companion App
The Camera Companion App offers remote control of one or multiple cameras, as well as customization
of the app's user interface. It focuses on the functions that are most frequently used during production.
The app uses the Camera Access Protocol (CAP) via the camera's internal WiFi radio or the ETH
interface. The app is available for download from the Apple App Store and can be used on iPhone,
iPad, M1 and M2 Mac computers and the Apple watch.
ARRI Partner Program
section on the ARRI website.
NOTICE
and the Camera Access Protocol Feature List in the
96
Advertisement
Table of Contents
