24.2.3 Side Accessories - ARRI ALEXA 35 User Manual

ALEXA 35 Accessories

24.2.3 Side Accessories

Camera Side Bracket CSB-1L K2.0033573
The Camera Side Bracket CSB-1L allows mounting of accessories to the left side of the
ALEXA 35. It features an ARRI rosette for hand grips and multiple 1/4-20, 3/8-16 and M4
mounting holes.
Camera Side Bracket CSB-1R K2.0033571
The Camera Side Bracket CSB-1R allows mounting of accessories to the right side of
the ALEXA 35. It features an ARRI rosette for hand grips and multiple 1/4-20, 3/8-16 and
M4 mounting holes. It can be extended with the Camera Side Bracket CSB-1R Exten-
sion (K2.0034189).
Camera Side Bracket CSB-1R Extension K2.0034189
The Camera Side Bracket CSB-1R Extension is an extension to the Camera Side Brack-
et CSB-1R, providing additional attachment points. It features multiple 1/4-20, 3/8-16 and
M4 mounting holes. It attaches to the CSB-1R with two Torx T8 screws.
Articulated Mounting Plate AMP-1 K2.0034182
The Articulated Mounting Plate AMP-1 is a hinged plate that allows accessories to be
mounted in locations that would have previously prevented access to various camera
ports. The AMP-1 allows further adjustment up/down in relation to its attachment brack-
et. It is compatible with any accessory with a 1/4-20, 3/8-16 or M4 attachment point and
is particularly suited to video transmitters and motor controllers.
Rod Mounting Bracket RMB-3 K2.0006186
The Rod Mounting Bracket RMB-3 is a great method to attach an accessory support rod
virtually anywhere on the camera, often used to provide a rod for lens motors by mount-
ing the RMB-3 onto one of the side brackets. The RMB-3 can also be used to support
the Viewfinder Cross Pipe for mounting viewfinders.
Rod Mounting Bracket RMB-7 K2.0023907
The Rod Mounting Bracket RMB-7 provides support for a single 19 mm support rod (or
15 mm with reduction insert K2.66255.0). Often used with lens motors, the RMB-7 is op-
timized for ARRI TRINITY and TRINITY 2. The RMB-7 mounts to M4 threads spaced 20
mm apart. The RMB-7 can also be used to support the Viewfinder Cross Pipe for mount-
ing viewfinders.
RMB-3 and RMB-7 fulfill the same purpose, except that RMB-7 has a low profile design
with a wing thumb screw underneath the rod holder, ensuring the ALEXA 35 with RMB-7
fits inside the ARRI Trinity.
106