Table of Contents
Advertisement
Monitoring
Info: SDI Zoom is not available when using UHD SDI formats (6G & 12G).
14.7
SDI Settings
SDI Image
The setting for the SDI image determines whether the SDI image is output as a clean feed or including
status information and status overlays.
► Select MENU > Monitoring > SDI > SDI 1 Image
► Select MENU > Monitoring > SDI > SDI 2 Image.
Following options are available:
Clean
Processed
SDI Format
► Select MENU > Monitoring > SDI > SDI 1 Format to set the format of the SDI 1 output.
► Select MENU > Monitoring > SDI > SDI 2 Format to set the format of the SDI 2 output.
Following options are available:
422 1.5G HD
422 3G HD
444 3G HD
422 6G UHD
422 12G UHD
444 12G UHD
Info: 48p may not be supported by some SDI devices, as this is not a defined frame rate according
to the SMPTE standard.
Info: 6G / 12G formats are not available when the recording resolution is set to 2K or HD.
Image is output as a clean feed. Neither status overlays, frame lines nor surround view are
displayed. Magnification is not supported.
Image may include status information and overlays.
Images are output according to SMPTE 292M.
Available frame rates are 23.976p/psf, 24p/psf, 25p/psf, 29.97p/psf and 30p/psf
p (progressive) transmits images line by line starting at the top left pixel.
psf (progressive segmented frame) splits progressive images into fields (odd lines and even
lines) and transmits these (all odd before all even) line by line.
Images are output according to SMPTE ST 424:2012
Available frame rates are 48p, 50p, 59.94p and 60p
Images are output according to SMPTE ST 424:2012
Available frame rates are 23.976p, 24p, 25p, 29.97p and 30p
Images are output according to SMPTE ST 2081-10:2015
Available frame rates are 23.976p, 24p, 25p, 29.97p and 30p
Images are output according to SMPTE ST 2048-1
Available frame rates are 48p, 50p, 59.94p and 60p
Images are output according to SMPTE 2082-10:2015
Available frame rates are 23.976p, 24p, 25p, 29.97p and 30p
68
Advertisement
Table of Contents
