System Settings; Language Setting; System Time And Date; Button And Display Settings - ARRI ALEXA 35 User Manual

System Settings

18 System Settings
18.1

Language Setting

► Select MENU > System > Language to set the system language between English and Chinese
(simplified).
18.2

System Time and Date

► Select MENU > System > System Time + Date to set the system time and date.
18.3

Button and Display Settings

► Select MENU > System > Buttons + Display > Display Style to set the display style between Day or
Night.
► Select MENU > System > Buttons + Display > Button Brightness or
► Select Side Display > Settings > Button Brightness
to set the brightness of camera and MVF-2 buttons from 0 (off) to 4 (the highest brightness).
18.4

Fan Settings

Select to set the fan mode to Low Noise for locations with ambient temperatures up to 30°C (86°F). For
locations with ambient temperatures higher than 30°C (86°F), set to Rec Low.
► Select MENU > System > Fan Mode.
Following options are available:
Rec Low
Low Noise
18.5

Reset of Electronic Horizon

► Select MENU > System > Reset Electronic Horizon.
► Place the camera on a level surface and press RESET.
Info: A message is displayed if either the roll, the tilt or both values exceed the calibration range
and resetting is not possible.
18.6

Update

Use a fully charged battery or a mains power supply to avoid power loss during updates.
Do not switch off the camera or unplug power during update processes.
Do not disconnect or remove components that are being updated.
Increases fan speed during standby to cool the camera. Minimizes fan speed/noise during
recording. Ideal in an environment warmer than 30 °C (86 °F).
Minimizes fan noise during standby and recording.
Info: With data rates above 100 MB/s (due to fps/codec setting), the fan speed automatical-
ly increases to prevent the camera from overheating.
NOTICE
77