Table of Contents
Advertisement
Playback
13
Playback
In-camera playback plays back the clips on the recording media at their project frame rate and is output
to EVF, Monitor, SDI 1 and SDI 2. Playback can be controlled from a variety of locations such as the
MVF-2, the Web Remote, the Camera Companion App or hand units such as the Hi5.
► Press and hold the PLAY button (1) of the MVF-2 for
one second to start playback.
► Toggle between play and pause by briefly pressing the
PLAY button.
► To exit playback press and hold the PLAY button for one
second.
Playback Screen & Controls
The playback screen of the MVF-2 offers the following controls:
Play/pause can also be toggled by pressing the PLAY button on the MVF-2 or by pressing the jogwheel.
While playback is paused, rotate the jogwheel to scroll through the clip frame by frame. During
playback, you can use the jogwheel to increase or decrease the playback speed by up to 512x forward
or backward.
Info: The playback image is displayed with the currently active look applied. The camera does not
recall the look that was active during recording.
User Button Playback supports to start and exit playback.
User Button Check Last Clip plays the last five seconds of the last recorded clip.
Cliplist
The clip list lists all clips contained on the recording medium.
1
Skip reverse
Loads the previous clip from the cliplist.
2
Select another clip for playback from a list of
Cliplist
all clips on the recording medium.
3
Loads the next clip from the cliplist.
Skip forward
4
Exits playback.
Close
5
Play/pause
Toggles between play and pause.
6
Allows setting the clip end action.
Options
► Start Playback and select CLIPLIST
► Rotate the jogwheel to select a clip.
The first frame of the selected clip is displayed on
all monitoring outputs for preview. The clip's prop-
erties are displayed in the info panel on the right.
► Press the jogwheel or the SET button to play the
clip, press CANCEL to return to the playback
screen.
59
1
Advertisement
Table of Contents
