Philips 32PFL3007 Service Manual page 17

Service Modes, Error Codes, and Fault Finding
Default value
Item Item value 32"
10 CLR_TEMP_G 128
11 CLR_TEMP_B 120
12 AUTO_COLOR Press OK
13 ADC_GAIN_R 0
14 ADC_GAIN_G 0
15 ADC_GAIN_B 0
16 ADC_OFFSET_R 128
17 ADC_OFFSET_G 128
18 ADC_OFFSET_B 128
19 GAMMA_TABLE off
20 E-Fuse on
21 ORT_MODE off
22 RESET_PBS_PWD Press OK
23 V-COM Press OK
24 VIDEO_PWM_MEDIUM 150
25 VIDEO_PWM_MINIMUN 178
26 VIDEO_PWM_MAXIMUN 0
27 PWM_RATIO_BEST_PICTUR 100
E
28 PWM_RATIO_STD_TOP 80
29 PWM_RATIO_STD_BOTTOM 70
30 PWM_RATIO_BEST_POWER 70
31 VIDEO_STD_TH_HIGH 97
32 VIDEO_STD_TH_LOW 93
33 YPBPR_PHASE InValid
34 AUD_LIMITER_MODE 2
35 AUD_THRESHOLD_BYTE1 255
36 AUD_THRESHOLD_BYTE2 207
37 AUD_THRESHOLD_BYTE3 5
38 AUD_GAIN_LINEIN 3
39 AUD_GAIN_HDMI 2
40 AUD_GAIN_ATV 20
41 AUD_GAIN_DTV 15
42 AUD_GAIN_USB 2
43 TUNER_ID 167
44 ESTICKER NVM1 3
45 ESTICKER NVM2 6
46 ESTICKER NVM3 7
47 ESTICKER NVM4 8
48 ESTICKER NVM5 9
49 ESTICKER NVM6 10
50 ESTICKER NVM7 255
51 ESTICKER NVM8 255
52 ESTICKER NVM9 255
53 ESTICKER NVM10 255
54 ESTICKER NVM11 255
55 ESTICKER NVM12 14
56 ESTICKER NVM13 17
57 ESTICKER NVM14 18
58 ESTICKER NVM15 19
59 ESTICKER NVM16 20
60 ESTICKER NVM17 21
61 ESTICKER NVM18 255
62 ESTICKER NVM19 255
63 ESTICKER NVM20 255
64 ESTICKER NVM21 255
65 ESTICKER NVM22 255
66 ESTICKER RESET Press OK
67 CIPLUS QUERY Press OK
68 CIPLUS UPDATE Press OK
69 AQ_TABLE_INDEX 1
70 LIGHT SENSOR Press OK
71 EDID UPDATE Press OK
72 TCON_GAMMA_UPDATE Press OK
73 AUDIO DEFAULT INIT Press OK
74 TTX Enable On
75 AGEING MODE Off
76 VIRGIN_MODE Off
77 EXIT_FACTORY Press OK
How to Exit the Factory mode
Use one of the following methods:
42" Description
121 Green colour temperature setting
107 Red colour temperature setting
PC: any pattern that has black and white, YPbPr: SMPTE bar (colour bar), any timing.
Red ADC gain
Green ADC gain
Blue ADC gain
Red ADC offset
Green ADC offset
Blue ADC offset
GAMMA_TABLE
E-fuse mode
ORT mode
Use this to reset the Child Lock
V-COM
VIDEO PWM Medium value
VIDEO PWM Minimum value
VIDEO PWM Maximum value
PWM ratio best picture
PWM ratio standard top
PWM ratio standard bottom
PWM ratio best power
VIDEO standard threshold high
VIDEO standard threshold low
Not available for this chassis
Three modes, 0: off, 1: adaptive mode, 2: fixed mode
Limit threshold
Limit threshold
Limit threshold
Line-in audio gain
HDMI audio gain
Analogue TV audio gain
Digital TV audio gain
USB audio gain
Displays and changes the Tuner ID with the left and right cursor. Not to be changed when the tuner is replaced
with the correct service part
3 ESTICKER value
4 ESTICKER value
6 ESTICKER value
7 ESTICKER value
8 ESTICKER value
9 ESTICKER value
10 ESTICKER value
255 ESTICKER value
255 ESTICKER value
255 ESTICKER value
255 ESTICKER value
14 ESTICKER value
15 ESTICKER value
17 ESTICKER value
18 ESTICKER value
19 ESTICKER value
20 ESTICKER value
21 ESTICKER value
255 ESTICKER value
255 ESTICKER value
255 ESTICKER value
255 ESTICKER value
ESTICKER reset
Shows the Validity of the CI+ key and the supplier information
Used to enter a new CI+ code into the NVM. This can only be used when no CI+ code exists in the NVM
3 Audio Quality index
Light sensor
Used to enter a new EDID codes into the NVM
TCON gamma update
AUDIO default initialization
TTX function on/off
Use this for ageing a new LCD panel
Use this to return the set to virgin mode. Depends whether the set has been used already.
Exits the Factory mode
back to
div. table
TPM9.1AL LA
• Select EXIT_FACTORY from the menu and press the "OK"
button.
5. EN 17
2012-Jun-15