Table of Contents
Advertisement
KOBALT® is a registered trademark of
LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number
Questions, problems, missing parts? Before returning to your retailer, call our Customer
Service Department at 1-888-3KOBALT.
WET TILE/STONE SAW with
LASER and LED WORK LIGHT
Purchase Date
ITEM #0325791
Model: KB7004
Français p. 21
Español p. 42
Advertisement
Table of Contents
Related Manuals for Kobalt KB7004
Summary of Contents for Kobalt KB7004
- Page 1 ITEM #0325791 WET TILE/STONE SAW with LASER and LED WORK LIGHT Model: KB7004 KOBALT® is a registered trademark of LF, LLC. All Rights Reserved. Français p. 21 Español p. 42 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our Customer...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Product Specificaitons…..…..…..…..……………..……………....…Page 2 Safety Information..…..…..…..………………..………………....…...…Page 3 Package Contents..…..…..…..…..……………………....……..……...…Page 10 Assembly Instructions...…..…..……………………………………........Page 11 Operation Instructions…..………………………………..........……Page 14 Care and Maintenance..…..…..………………………….....…………..…Page 17 Troubleshooting..…..…..…..…..…………………………....…………...Page 17 Warranty………………………………………....………..……........….Page 18 Replacement Parts..…..…..…..…..………………………...……………….Page 18 PRODUCT SPECIFICATIONS Power supply 120V, 60Hz Motor 5.8 A No-load speed 3500 RPM Blade 7 in. -
Page 3: Safety Information
SAFETY INFORMATION GENERAL SAFETY RULES FOR ALL POWER TOOLS WARNING: Some dust created by using power tools contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Safety is a combination of using common sense, staying alert, and knowing how your tile saw works. Read this manual to understand this tile saw and how to use it safely. - Page 4 ELECTRICAL SAFETY WARNING: To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands. • VOLTAGE: Before plugging in the tool, make sure that the outlet voltage is within the voltage marked on the tool’s data plate.
- Page 5 GROUND INSTRUCTION All grounded, cord-connected tools: • In the event of a malfunction or breakdown, grounding provides a path of least resistance for the electric current to reduce the risk of electrical shock. This tool has an electric cord with an equipment- grounding conductor and a grounding plug.
- Page 6 • WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry. Pull back and secure long hair. Non-slip footwear is recommended. • KEEP YOUR HAIR, CLOTHING, AND GLOVES AWAY FROM MOVING PARTS. • REMOVE ADJUSTING KEYS OR WRENCHES. Form a habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on.
- Page 7 • CHECK FOR DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, mounting, and any other conditions that may affect its operation.
- Page 8 Item/Article/Artίculo # 0325791 B) LORSQU’IL S’AVÈRE UTILE, UTILISEZ LE PROTECTEUR AFIN D’EMPÊCHER LES RÉSIDUS DE SIERRA PARA BALDOSAS Model/Modèle/Modelo # KB7004 VOUS ATTEINDRE. C) DÉBRANCHEZ LA SCIE AVANT D’EFFECTUER L’ENTRETIEN, LORSQUE VOUS REMPLACEZ LA LAME ET QUAND VOUS PROCÉDEZ AU NETTOYAGE.
- Page 9 Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth or eyes or to lie on the skin may promote absorption of harmful chemicals.
-
Page 10: Package Contents
PACKAGE CONTENTS PART DESCRIPTION QUANTITY Tile saw Rip fence Angle guide Shaft wrench Nut wrench Water plug... - Page 11 PART DESCRIPTION QUANTITY Top blade guard Blade Riving knife Angle guide Parallel rip fence Angle guide locking knob On/Off switch Parallel rip fence locking knob Reservoir Laser adjust knob Angle table lock Laser aperture Laser/Led switch button Battery compartment cover...
-
Page 12: Assembly Instructions
ASSEMBLY INSTRUCTIONS Before assembling the product, make sure all parts are present. Compare the package with the package contents list and the hardware contents on the preceding page. If any part is missing or damaged, do not attempt to assemble the product. Contact Customer Service (1-888-3KOBALT) for replacement parts. - Page 13 CHANGING THE BLADE WARNING: Disconnect the power supply before making adjustments or performing maintenance on the machine. 1. Unplug the tile saw. 2. Disengage the angle table lock (Fig. 4). 3. Lift and remove the angle table. 4. Hold the end of the motor shaft with the shaft wrench while loosening the blade-securing nut in a counterclockwise direction with the nut wrench (Fig.
-
Page 14: Operation Instructions
OPERATION INSTRUCTIONS NOTE: Before attempting to use this tile saw, familiarize yourself with all its operating features and safety requirements. FILLING THE WATER TRAY 1. Disengage the angle table lock as shown (Fig. 6). 2. Lift and remove the angle table. 3. - Page 15 MAKING A STRAIGHT CUT 1. Turn off the saw. 2. Mark the desired cutting line directly onto the work- piece with a pencil or other marker. 3. Adjust the rip fence to the desired distance from the blade, using the scale rules on the table surface for reference.
- Page 16 11. Slowly push the workpiece into the blade to make the cut. 12. Turn off the saw and wait for the blade to come to a complete stop. 13. Remove the cut pieces and any debris from the table. MAKING A BEVEL CUT 1.
-
Page 17: Care And Maintenance
CARE AND MAINTENANCE CAUTION: Before performing maintenance or cleaning, disconnect from the power source. • Never use water or any other chemical liquids to clean the electrical parts of the machine. • Keep the ventilation slots clean to prevent overheating of the motor. •... -
Page 18: Warranty
3-YEAR HASSLE-FREE WARRANTY This tile saw is warranted to the original purchaser from the original purchase date for three (3) years subject to the warranty coverage described herein. This tile saw is warranted for the original user to be free from defects in material and workmanship. If you believe that the tile saw is defective at any time during the specified warranty period, simply return the tile saw along with proof of purchase to the place of purchase for a free replacement or refund or call 1-888-3KOBALT for warranty service. - Page 19 PART NO. DESCRIPTION 6121001 MAIN TABLE 6121002 RUBBER CUSHION 6121003 ACTIVE LOCK 6121004 SPRING 6121005 WASHER 6121006 SCREW 6121007 MOVE TABLE 6121008 JOINT 6121009 ANGLE TABLE SUPPORT_L 6121010 ANGLE TABLE SUPPORT_R 6121011 SPLASH BOARD 6121012 SCREW 6121013 TUBULAR SUPPORT 6121014 FOOT 6121015 FOOT INNER...
- Page 20 6121034 MOTOR 6121035 WATER TRAY 6121036 WATER TRAY BUSH 6121037 SEAL 6121038 SEAL 6121039 SCREW 6121040 MOTOR COVER 6121041 MOTOR SUPPORT 6121042 SWITCH 6121043 CAPACITOR 6121044 RIVING KNIFE COVER 6121045 RIVING KNIFE 6121046 SCREW 6121047 WATER PLUG 6121048 SEAL 6121049 OUT FLANGE 6121050 INNER FLANGE...