NEC MultiSync E658 User Manual page 59

Commands
Connecting the monitor to a computer via RS-232C or to a network via LAN allows for the transmission of commands to the
monitor, providing remote control of the monitor from a connected device. Instructions for each command format can be found in
"External_Control.pdf" in our Website (see "Appendix B External Resources"
RS-232C Interface
Item
PROTOCOL
BAUD RATE
DATA LENGTH
PARITY
STOP BIT
FLOW CONTROL
Network (LAN) Interface
Item
PROTOCOL
PORT NUMBER
COMMUNICATION SPEED
Details
RS-232C
9600 [bps]
8 [bits]
NONE
1 [bit]
NONE
Details
TCP
7142
AUTO setting (10/100Mbps)
page
English - 56
71).