NEC MultiSync E658 User Manual page 57

Network Settings
Click on "NETWORK" on the left-hand column on the HOME screen to enter the setting screen.
INPUT SOURCE: HDMI1
STATUS
PROTOCOL
TCP
ROOMVIEW
CRESTRON CONTROL
AMX
NAME
NETWORK
SYSTEM
LOGOUT
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS PRIMARY
DNS SECONDARY
ROOMVIEW Settings
Click on "ROOMVIEW" on the left column below HOME.
The monitor supports Crestron's ROOMVIEW, allowing multiple devices connected in the network to be managed and controlled
from a computer or a controller.
ROOMVIEW Enables or Disables managing from the computer.
PORT Sets the Crestron port used for Ethernet communication.
For further information, visit
NETWORK SETTINGS
INTERFACE
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS PRIMARY
DNS SECONDARY
Select a method for setting the IP ADDRESS.
Off: Sets fixed network settings.
On: Obtains the network settings from the DHCP server on the network.
Manual DNS: Obtains the network settings from the DHCP server on the network but the DNS
is set manually.
NOTEE:
Consult your network administrator if you have any trouble with the connection.


Set the IP address for the monitor connected to the network when [Off] is selected for [DHCP].
Set the subnet mask for the network to which the monitor is connected when [Off] is selected for
[DHCP].
Set the default gateway for the network to which the monitor is connected when [Off] is selected for
[DHCP].
Enter [0.0.0.0] to delete the setting.
Enter the IP address of the primary DNS server of the network connected to the monitor.
NOTEE:
Enter [0.0.0.0] to delete the setting.


Enter the IP address of the secondary DNS server of the network connected to the monitor.
NOTEE:
Enter [0.0.0.0] to delete the setting.


http://www.crestron.com
Off
192.168.0.10
255.255.255.0
0.0.0.0
0.0.0.0
0.0.0.0
English - 54
Top