Wheel Installation - Yamaha YXZ 1000R YXZ10YMXN Owner's Manual

must replace the tires in pairs (front or rear)
with tires of the same size and type as the
originals. Never replace just one tire.
EWB03390
WARNING
Installing improper tires on your Yamaha
YXZ10YMXN can affect handling and sta-
bility. This can cause a loss of control.
The tires listed below have been approved by
Yamaha Motor Manufacturing Corporation of
America for this model.
Front tire:
Size:
29 x 9.00R-14NHS
Manufacturer/model:
MAXXIS/M917 / BIGHORN
Rear tire:
Size:
29 x 11.00R-14NHS
Manufacturer/model:
MAXXIS/M918 / BIGHORN
EBU33090

Wheel installation

1. Install the wheel and the nuts.
2. Lower the vehicle so that the wheel is on
the ground.
3. Tighten the wheel nuts in a crisscross
pattern to the specified torque.
EWB03400
WARNING
Do not reverse the rims on your Yamaha
YXZ10YMXN to widen the track width. In-
stalling wheels improperly increases the
risk of wheel failure and accidents.
Tightening torques:
Front wheel nut:
95 N·m (9.5 kgf·m, 70 lb·ft)
Rear wheel nut:
95 N·m (9.5 kgf·m, 70 lb·ft)
9-56
9