Table of Contents
Advertisement
EBU32551
Brake light switch adjustment
The brake light switch, which is activated by
the brake pedal, is properly adjusted when
the brake light comes on just before braking
takes effect.
(b)
9
1. Brake light switch
2. Adjusting nut
If necessary, adjust the brake light switch.
1. Hold the brake light switch in place.
2. Turn the adjusting nut in direction (a) to
make the brake light come on earlier.
3. Turn the adjusting nut in direction (b) to
make the brake light come on later.
(a)
1
2
EBU32561
Cable inspection and lubrication
EWB03380
WARNING
Damaged cables could restrict operation,
which may cause an accident or injury. In-
spect control cables frequently and re-
place damaged cables. Corrosion can
result when the outer covering of control
cables becomes damaged. Cables can
also become frayed or kinked.
Lubricate the cable ends. If the cables do not
operate smoothly, ask a Yamaha dealer to re-
place them.
Recommended lubricant:
Yamalube LubezAll
EBU35200
Pedal lubrication
The pivoting parts of the brake, clutch, and
accelerator pedals should be lubricated peri-
odically to prevent rust and ensure smooth
operation.
9-51
Advertisement
Table of Contents
Troubleshooting
