Final Gear Oil - Yamaha YXZ 1000R YXZ10YMXN Owner's Manual

Tightening torque:
Transmission oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
6. Check the O-ring for damage, and re-
place it if necessary.
7. Refill the transmission with the specified
amount of the recommended oil.
8. Install the transmission oil filler cap.
9. Start the engine and let it idle while
checking for oil leakage.
10. Stop the engine and check the oil level
one last time.
EBU36055

Final gear oil

9
Check the oil level and change the final gear
oil at the intervals specified in the periodic
maintenance chart.
ECB03590
NOTICE
When checking or changing the final gear
oil, make sure that no foreign material en-
ters the final gear case. If necessary, clean
the final gear oil filler bolt and surrounding
area.
Recommended oil:
YAMALUBE
SAE 80W-90 API GL-5 Hypoid gear oil
Oil quantity:
0.47 L (0.50 US qt, 0.41 Imp.qt)
Checking the final gear oil level
1. Park the vehicle on a level surface.
2. Remove the final gear oil filler bolt and its
gasket, and then check the oil level in the
final gear case. The oil level should be at
the brim of the filler hole.
9-29