Yamaha YXZ 1000R YXZ10YMXN Owner's Manual page 61

Spring preload setting:
Minimum (soft):
Distance A =
496.6 mm (19.55 in)
Standard:
Distance A =
483.9 mm (19.05 in)
Maximum (hard):
Distance A =
471.2 mm (18.55 in)
1. Distance A
1
5-30
4. Tighten the locknut to the specified
torque. NOTICE: Always tighten the
locknut against the adjusting nut, and
then tighten it to the specified torque.
[ECB00082]
Tightening torque:
Locknut:
41 N·m (4.1 kgf·m, 30 lb·ft)
Crossover setting
The crossover setting adjusts the timing when
the shock absorber transitions from the soft
spring to the hard spring.
TIP
 It is recommended to adjust the crossover
setting a similar distance whenever the
spring preload is adjusted.
 The crossover setting is measured from the
bottom of the spring retainer to the top of
the crossover locknut.
5