Advertisement
Quick Links
Advertisement
Related Manuals for Omega OCC32KZ
Summary of Contents for Omega OCC32KZ
- Page 1 Instruction Manual Ceramic Cooktop OCC32KZ...
- Page 2 Thank you for purchasing an Omega appliance Tailored for the modern aesthetic and lifestyle of busy people, your new Omega Appliance will make a welcome addition to the family. Omega caters to style-savvy customers who look for balance between stunning form and clever function.
-
Page 3: Table Of Contents
The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance. Due to continual product development, Omega reserves the right to alter specifications and appearances without notice. -
Page 4: Important Safety Warnings
Important Safety Warnings IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. - Page 5 Important Safety Warnings 18. All cabinetry and materials used in the installation must be able to withstand a minimum temperature of 100°C above the ambient temperature of the room it is located in, whilst in use. Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage or discolouration at temperatures below the guidelines given above.
-
Page 6: Product Information
Product Information 1. ON/OFF switch 2. Knob power control 3. Residual heat indicator 4. Heating zone indicator 1. Max. 1800W zone 2. Max. 1200W zone 3. Control panel Specifications Rated Voltage: 220-240Vac 50Hz Power Rating: 2900W Supply Connection: Hard-wired This information can be found on the rating plate (identification plate) affixed to the underside of the appliance. -
Page 7: Installation Instructions
Installation Instructions Cut out the work surface according to the sizes shown in the image below. Ensure that there is a minimum of 50mm of space around the cutout. The thickness of the bench should be at least 30mm. Please select heat-resistant and insulated bench materials (Wood and similar fibrous or hygroscopic materials should not be used as the bench material unless impregnated) to avoid the electrical shock and larger deformation caused by heat radiation from the hotplate. - Page 8 Installation Instructions In order to avoid accidentally touching the hot underside of the cooktop, or getting an unexpected electric shock, it is necessary to put a wooden insert, fixed by screws, at a minimum distance of 50mm from the bottom of the cooktop. There are ventilation holes around outside of the cooktop.
- Page 9 Installation Instructions Electrical Connection LOCAL AUTHORITY REQUIREMENTS Installation is only permitted by a licensed electrician and carried out according to instructions provided by the manufacturer. Incorrect installation might cause harm and damage, for which the manufacturer accepts no responsibility. Electrical Installation Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric wiring should be capable of handling the oven’s power rating (also indicated on the...
-
Page 10: Operating Instructions
Operating Instructions Touch Controls • The controls respond to touch, so you don’t need to apply any pressure. • Use the pad of your finger, not the tip. • You will hear a beep each time a touch is registered. •... - Page 11 Operating Instructions When the power is connected you will hear a beep and all the lights will come on for one second and then go out. This indicates that the cooktop has entered standby mode. Press the ON/OFF button. The LED display next to ON/OFF button will show “...
-
Page 12: Cleaning And Maintenance
Cleaning and Maintenance Before cleaning the cooktop, first isolate the cooktop from the power. Once done, ensure that there is no residual heat stored in the appliance. Vitro-ceramic glass is very resistant to high temperature and overheating. If there is residual heat stored in the appliance, the related residual heat icon will be on. To avoid burns, let the appliance cool down. -
Page 13: Australian & New Zealand Product Warranty Statements Of Standard Warranty Conditions
The Damage which occurs during delivery or installation. product will be repaired or replaced at the option of Omega, and 10. Claims to product surface coating due to liquid or solid all costs of installation, removal, cartage, freight travelling spill-overs, accidental damage or damage caused from expenses and insurance are to be paid by the customer.