Front Drive Bezels; Drive Bezel Blank - HP Compaq dx7200 MT Reference Manual

6.5 Front Drive Bezels

Follow these steps before removing or installing a front drive bezel.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel

6.5.1 5.25" Drive Bezel Blank

Press the two retaining tabs on the inside of the large bezel towards the outside of the bezel to
release the bezel blank 1. At the same time, pull the bezel blank in to remove it from the front
bezel 2.
To install a bezel blank, reverse the removal procedure.
Service Reference Guide, dx7200
Removal and Replacement Procedures— Microtower (MT) Chassis
(Section 6.1).
(Section 6.3).
(Section 6.4).
390812-001 6–7