Chassis Fan; Fan Shroud - HP Compaq dx7200 MT Reference Manual

7.12 Chassis Fan

1. Prepare the computer for disassembly
2. Remove the computer cover
3. Remove the fan shroud
4. Disconnect the chassis fan cable from the system board.
5. Remove the four screws that secure the fan to the chassis, then remove the fan from the
chassis.
To install the chassis fan, reverse the removal procedure. Be sure to orient the air flow into the
unit. Refer to the air flow arrows on the side of the fan housing for proper air flow orientation.
Service Reference Guide, dx7200
Removal and Replacement Procedures— Slim Tower (ST) Chassis
(Section 7.1).
(Section 7.5).
(Section 7.11).
390812-001 7–27