Sony PCWA-C100 Owner's Manual page 31

Setting up the Windows-based environment (Windows® Millennium Edition)
❑
Adding Client for Microsoft Networks
❑
Adding File and printer sharing for Microsoft Networks
❑
Adding NetBEUI (Option)
When you have added all components, proceed to the Specifying the IP address
✍
If the Version Conflict dialog box appears while you are setting up the Windows-based environment, click Yes to continue.
#
Installing NetBEUI is optional. Install it only when you use NetBEUI protocol on your network.
Adding TCP/IP
If TCP/IP -> Sony PCWA-C100 Wireless PC Card is not displayed in step 3 above, proceed as follows:
1 Click Add on the Configuration tab.
The Select Network Component Type dialog box appears.
2 Click Protocol, and then click Add.
The Select Network Protocol dialog box appears.
3 Select Microsoft in the Manufacturers list, and then select TCP/IP in the Network Protocols list.
4 Click OK.
TCP/IP -> Sony PCWA-C100 Wireless PC Card appears under The following network components
are installed.
Adding Client for Microsoft Networks
If Client for Microsoft Networks is not displayed in step 3, proceed as follows:
1 From the Configuration tab, click Add.
The Select Network Component Type dialog box appears.
2 Click Client, and then click Add.
The Select Network Client dialog box appears.
(page 25);
(page 31).
(page 26);
n N
30
(page 32) section.