Sony PCWA-C100 Owner's Manual page 27

Setting up the Windows-based environment (Windows® 98 Second Edition)
3 Select Microsoft in the Manufacturers list, and select Client for Microsoft Networks in the
Network Clients list.
4 Click OK.
Client for Microsoft Networks appears under The following network components are installed.
Adding File and printer sharing for Microsoft Networks
If File and printer sharing for Microsoft Networks is not displayed in step 3, proceed as follows:
1 Click File and Print Sharing on the Configuration tab.
The File and Print Sharing dialog box appears.
2 Select the I want to be able to give others access to my files and I want to be able to allow
others to print to my printer(s) check boxes.
3 Click OK.
File and printer sharing for Microsoft Networks appears under The following network
components are installed.
When you have added all components, proceed to the Specifying the IP address
✍
This client is required to allow other computers on the same Local Area Network to access files shared on your computer or to print documents on a
printer connected to your computer.
File and Print Sharing is not recommended while connected to the Internet. Security is an issue and Microsoft
connected to the Internet, use some firewall software.
Adding NetBEUI (Option)
If NetBEUI -> Sony PCWA-C100 Wireless PC Card is not displayed in step 3, proceed as follows:
1 From the Configuration tab, click Add.
The Select Network Component Type dialog box appears.
2 Click Protocol, then click Add.
The Select Network Protocol dialog box appears.
n N
26
(page 27) section.
®
warns to disable the option. While