Table of Contents
Advertisement
Functional Description and Specifications
Cordless Scissors (Shears)
Model number
Allowed ambient temperature
– during charging
– during operation/storage
AC Power Adapter
Model number
Input
Output
Battery
Chemistry
Capacity
Charge time
USB Cable
Rating
and the provided USB cable to charge the
tool. Use of other power adapter or USB
cable may increase the risk of fire, personal
injury and property damage.
Your Dremel HSSC-01 does not come
completely charged from the factory. Be
sure to charge tool prior to initial use.
–
Insert USB-C cable 9 into USB port of
power adapter 10 (Fig. 1).
–
Plug power adapter 10 into standard
power outlet.
–
Plug USB-C plug into USB-C port 6.
The battery charge indicator 7 will blink
indicating that the battery is charging.
See "Battery Charge Indicator" below
for more information.
It is normal for the handle of the tool to
get warm during charging.
Note: The tool cannot be used during
the charging process.
Charging the Tool
Use only Dremel
510 power adapter
HSSC-01
41...113 °F (5...+45 °C)
–4...122 °F (–20...+50 °C)
510
120V~60Hz
5V
1.0A
Li-ion
2.0 Ah
Approx. 2.5 Hr.
5V
2.0A
When the battery is fully charged,
disconnect the USB-C end of the cable 9
from the tool.
Unplug the power adapter from the
power outlet (unless you are charging
another tool).
BATTERY CHARGE INDICATOR
At each turn on, the battery status
indicator 7 will report the current
charge state of the battery for 3
seconds. See table.
Turn-On Battery Status
LED
Green
Orange
Red
In use, the battery status indicator will
flash red to indicate a low battery
(<10%) condition.
-9-
Charge Status
>50%
<50%, >10%
<10%
Advertisement
Table of Contents
