Safety Symbols; General Power Tool Safety Warnings - Dremel 100 Operating/Safety Instructions Manual

Find Quality Products Online at:
The definitions below describe the level of severity for each signal word. Please read the manual
and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to potential
!
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.

General Power Tool Safety Warnings

Read all safety warnings and all instructions. Failure to follow the warnings
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
and instructions may result in electric shock, fire and/or serious injury.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered
Do not operate power tools in explosive
or dark areas invite accidents.
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
Keep children and bystanders away while
or fumes.
operating a power tool. Distractions can
Electrical safety
cause you to lose control.
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
Avoid body contact with earthed or grounded
shock.
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
Do not expose power tools to rain or wet
grounded.
2
GlobalTestSupply
www.

Safety Symbols

conditions. Water entering a power tool will
Do not abuse the cord. Never use the cord
increase the risk of electric shock.
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
When operating a power tool outdoors,
cords increase the risk of electric shock.
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
If operating a power tool in a damp location
reduces the risk of electric shock.
is unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply. Use of
Personal safety
an GFCI reduces the risk of electric shock.
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention
while operating power tools may result in
Use personal protective equipment. Always
serious personal injury.
.com
sales@GlobalTestSupply.com