Cleaning The Appliance - universalblue UBH2303-21 User Manual

4. CLEANING THE APPLIANCE

General cleaning
 Before performing any cleaning or maintenance task, unplug
the oven.
 Set all the controls in the OFF position.
 Wait until the inside of the oven cools until it is only slightly
hot; Cleaning is easier if the oven is a little hot.
 Wipe the surfaces with a soft cloth, a sponge or a soft damp
sponge and then dry them with a cloth.
 If it is very dirty, use hot water and a non-abrasive cleaning
product.
 Do not use abrasive cleaners or sharp metal scrapers to clean
the oven glass, as they may scratch the surface and damage
the glass.
 Avoid the contact of acidic substances (lemon juice, vinegar
...) with stainless steel elements.
 Do not use a high-pressure cleaner to clean the oven.
 The oven trays can be washed with a mild detergent.
 Inside the Oven
Appropriate
recommendations of the manufacturer and trying it on a small part of
the gap. Abrasive cleaning agents or abrasive clothes must not be
used on the surfaces of the gap. Do not clean with a jet of steam.
NOTE: The manufacturer of this appliance does not take
responsibility for damages caused by chemicals or abrasive cleaning.
REMOVING SIDE WIRE TRAYS OF THE OVEN
It is possible to remove and clean the side wire trays in which trays
and wire grids are placed easily. When the oven is OFF (and cold),
grab the guides at the bottom and pull them out. Use the reverse
procedure to reposition them
chemicals can be used after consulting the
52