universalblue UBH2303-21 User Manual page 50

Position the oven so that it is easier to reach the socket used
for the electrical connection or the bipolar switch.
Do not let the power cord touch the hot surfaces when it is
placed and do not attach it to the oven lid.
Contact the nearest authorized service center if the power
cord is damaged. Make sure that the authorized service has
the opportunity with a new cable with plastic insulation of the
same size and that can withstand the electric current needed
by the oven.
A bipolar switch with at least 3 mm must be installed between
the points of contact between the device and the electric cable
and suitable for transporting the desired load in accordance
with the laws in force.
If the device is to be connected directly to the electric wiring. Ground
wire must not be cut be double pole switch.
 It is not advised to use adapters, multi plugs or extension
cords. If absolutely necessary, adapters or extension cords in
line with safety laws can be used. However, never go beyond
the maximum current capacity and maximum power stated for
the adapter.
 Test heating elements for 3 minutes after the connections are
done.
 Electricity safety of the device is guaranteed only if connected
to suitable source correctly with grounding in accordance with
the rules. Our company cannot be held responsible for the
50