Table of Contents
Advertisement
Available languages
Available languages
adequate ventilation, respect the measurements and installation
distances indicated.
It is important NOT to COVER the front of the oven. This part can not
be placed behind any door for decorative purposes.
IMPORTANT
In order for the oven to function properly, the space for the oven
housing must be adequate. The surfaces of the kitchen next to the
oven must be made of a heat resistant material. Make sure that
surface adhesives made of varnished wood panels can withstand
temperatures of at least 120 ° C. Plastics or adhesives that can not
withstand these temperatures will melt and deform. Once the oven is
installed in its place, completely isolate all electrical components. It
is a legal requirement on security. All protection elements must be
firmly fixed in place, so that they can not be removed without using
tools. Remove the rear part of the cabinet or space intended for the
oven to ensure adequate ventilation. There must be a minimum of 45
mm between the back of the oven and the adjoining wall or surface.
The installation must be carried out by an authorized technician in
accordance with the guidelines. Our company is not responsible for
damages to people, animals or property due to improper installation.
INSTALLATION WARNINGS
The dimensions and materials of the cabinet or cabinet in which the
built-in oven will be installed must be correct and must be resistant to
temperature increases. Install as shown in the Figure.
The walls of the furniture in which the oven is installed must
be resistant to heat. The wall panels must be resistant to 100
° C, especially if the side walls are made of wallboard. Plastic
panels or adhesives that are not resistant to this heat can be
deformed and damaged.
46
Advertisement
Table of Contents
