BMW X5 2018 Owner's Manual page 66

Controls
Settings
▷ To lower: press the button, arrow 1, and
push the head restraint down.
▷ To raise: push the head restraint up.
After setting the height, move the head re‐
straint up or down slightly, making sure it en‐
gages properly.
Removing
The outer head restraints can be removed.
Only remove the head restraint if no one will be
sitting in the seat in question.
1. Raise the head restraint up against the re‐
sistance.
2. Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the head
restraint.
66
Settings
Online Edition for Part no. 01402983801 - X/17
Memory function
Concept
The following settings can be stored and, if
necessary, retrieved using the memory func‐
tion:
▷ Seat position.
▷ Exterior mirror position.
▷ Steering wheel position.
▷ Height of the Head-up Display.
General information
Two memory locations with different settings
can be set for each driver profile, refer to
page 48.
Depending on the vehicle equipment, the fol‐
lowing settings are not stored:
▷ Backrest width.
▷ Lumbar support.
Safety information
WARNING
Using the memory function while driving
can lead to unexpected seat or steering wheel
movements. Vehicle control could be lost.
There is a risk of an accident. Only retrieve the
memory function when the vehicle is station‐
ary.◀
WARNING
There is a risk of jamming when moving
the seats. There is a risk of injury or risk of
damage to property. Make sure that the area of
movement of the seat is clear prior to any ad‐
justment.◀