BMW X5 2018 Owner's Manual page 184

Controls
Controlling the air flow manually
Concept
The air flow for climate control can be adjusted
manually.
General information
To manually adjust air flow switch off AUTO
program first.
Operation
Press the left or right side of the but‐
ton: decrease or increase air flow.
The selected air flow is shown on the display of
the automatic climate control.
The air flow of the automatic climate control
may be reduced automatically to save battery
power.
Controlling the air distribution
manually
Concept
The air distribution for climate control can be
adjusted manually.
Operation
Press button repeatedly to select a
program:
▷ Upper body region.
▷ Upper body region and floor area.
▷ Floor area.
▷ Windows and floor area.
▷ Windows, upper body region, and floor
area.
▷ Windows: driver's side only.
▷ Windows and upper body region.
If the windows are fogged over, press the
AUTO button on the driver's side to utilize the
condensation sensor.
184
Climate control
Online Edition for Part no. 01402983801 - X/17
SYNC program
Concept
The system enables the transfer of current
settings on the driver's side for temperature,
air flow, air distribution, and the AUTO pro‐
gram to the front passenger side and to the left
and right rear.
Switching on/off
The program is also switched off if the
settings on the front passenger side or
in the rear are changed.
Residual heat
Concept
The heat stored in the engine is used to heat
the car's interior. This is possible up to 15 mi‐
nutes after switching off the engine.
Functional requirement
▷ Warm engine.
▷ The battery is sufficiently charged.
▷ External temperature below 77 ℉/25 ℃.
The availability of the function is shown on the
display of the automatic climate control.
Switching on
1. Switching off the ignition.
2. Press the right side of the button
on the driver's side.
The symbol appears on the display of the
automatic climate control.
The interior temperature, air flow and air distri‐
bution can be adjusted with the ignition
switched on.
Switching off
At the lowest fan speed, press the left side of
the button on the driver's side.