BMW X5 2018 Owner's Manual page 51

Hide thumbs Also See for X5 2018:
Table of Contents

Advertisement

Unlocking is signaled by two flashes,
locking by one.
Automatic locking
Via iDrive:
1.
"Settings"
2.
"Doors/key"
3.
Select the desired function:
"Lock if no door is opened"
The vehicle locks automatically after a
short period of time if no door is
opened after unlocking.
"Lock after start driving"
The vehicle locks automatically after
you drive off.
Adjusting the last seat, mirror, and
steering wheel position
Via iDrive:
1.
"Settings"
2.
"Doors/key"
3.
"Last seat position autom."
When the vehicle is unlocked, the driver's seat,
exterior mirrors and steering wheel resume
their last set positions.
Alarm system
General information
When the vehicle is locked, the vehicle alarm
system reacts to the following changes:
Unauthorized opening of a door, the hood
or the tailgate.
Movements in the car's interior.
Changes in the vehicle tilt, e. g., during at‐
tempts at stealing a wheel or when towing
the vehicle.
Disconnected battery voltage.
Improper use of the socket for Onboard Di‐
agnosis.
Online Edition for Part no. 01402983801 - X/17
Opening and closing
The alarm system signals these changes visu‐
ally and acoustically:
Acoustic alarm.
Depending on local regulations, the acous‐
tic alarm may be suppressed.
By switching on the hazard warning sys‐
tem.
By flashing the daytime running lights.
Switching on/off
When you lock and unlock the vehicle with the
remote control or Comfort Access, the alarm
system will also switch on or off at the same
time.
Opening the doors with the alarm
system switched on
The alarm system is triggered when a door is
opened if the door was unlocked using the
integrated key in the door lock.
Switching off the alarm, refer to page 52.
Opening the tailgate with the alarm
system switched on
The tailgate can be opened even when the
alarm system is switched on.
After the tailgate is closed, it is locked and
monitored again provided the doors are
locked. The hazard warning system flashes
once.
Panic mode
You can trigger the alarm system if you find
yourself in a dangerous situation.
Press button on the remote con‐
trol and hold for at least 3 sec‐
onds.
Briefly press the button on the remote con‐
trol three times in succession.
To switch off the alarm: press any button.
Controls
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents