BMW X5 2018 Owner's Manual page 160

Controls
Press button on the steering wheel.
▷ If active: press twice.
▷ If interrupted: press once.
The displays go out. The stored desired speed
is deleted.
Interrupting manually
Press button on the steering wheel.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Interrupting automatically
The system is automatically interrupted in the
following situations:
▷ When the driver applies the brakes.
▷ When selector lever position D is disen‐
gaged.
▷ Dynamic Traction Control DTC is activated
or DSC Dynamic Stability Control is deacti‐
vated.
▷ If DSC Dynamic Stability Control inter‐
venes.
▷ When SPORT+ is activated with Driving
Dynamics Control.
▷ If the safety belt is unbuckled and the driv‐
er's door is opened while the vehicle is
standing still.
▷ If the system has not detected objects for
an extended period, for instance on a road
with very little traffic without curb or
shoulder markings.
▷ If the detection range of the radar is im‐
paired, for instance by dirt or heavy fog.
▷ After a stationary period of approx. 3 sec‐
onds when the vehicle has been braked to
a stop by the system.
160
Driving comfort
Online Edition for Part no. 01402983801 - X/17
Setting the speed
Maintaining/storing the speed
Press the rocker switch while the system is in‐
terrupted.
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
The stored speed is displayed in the speedom‐
eter and briefly in the instrument cluster, refer
to page 161.
DSC Dynamic Stability Control is switched on,
if necessary.
The speed can also be stored by
pressing a button.
Press button.
Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the
road is clear.